Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: BMW 2.5TD into XJ?  (Read 1464 times)

0 Members and 1 Guest are viewing this topic.

grayspeed

  • Guest
BMW 2.5TD into XJ?
« on: October 09, 2010, 01:43:57 PM »
Has anybody put a BMW 6 cylinder 2.5TD engine in an Xj before? I've had a quick look and reckon it'll go in lovely.

I've been offered a complete car and with the price of LPG rising rapidly diesel could be the way forward but don't want a hideous VM motor. Max torque is only slightly lower than the 4l at 190 so not too much difference. The same engine is used in the range rover and it seems to pull the 2 1/2 tons of junk around ok.

Any thoughts?
Logged

Dave69

  • Club Member
  • Forum Member
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
Re: BMW 2.5TD into XJ?
« Reply #1 on: October 10, 2010, 04:38:59 PM »
depends on how much of the work you will do yourself. there was one in tamworth with the bmw engine but the jeep ip cluster wasn't connected and obviously not working.
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

Mike Pavelin

  • Guest
Re: BMW 2.5TD into XJ?
« Reply #2 on: October 10, 2010, 04:56:38 PM »
The electrics would be the main problem.
Logged

Green Jeep

  • Guest
Re: BMW 2.5TD into XJ?
« Reply #3 on: October 11, 2010, 08:51:12 PM »
Good luck Gray!

Defo a strong engine the BMW lump, seems a shame to junk your current set up though.

Cheers Maf
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal