Topic: help pls..no clue whats going on with mental car??????? (Read 14325 times)

mipple · « **on:** November 12, 2010, 08:27:44 PM »

ok where do i start???
I have no clue what im doing with cars but will try to understand all the "talk" and pass this info on to try and get me back on the road.
First of all for the past 12 months the left indicator on my jeep grand cherokee 2.7 02 year, wouldnt work, it would if i flshed my lights at first but then that stopped and i had to turn the hazard lights on to get the indicator to work..due to lack of funds iv just had to carry on and make it work that way!
Yesterday i got in the car and turned it on, the first thing i noticed was the engine light came on, "panick struck" as iv already had to have new fuel pumps and a new ecu unit. All the other lights were on and wouldnt go off, i drove the car and i noticed that the gagues werent working and the petrol said i had none with the light being on...however the computer was still on and said i had 109 miles left in my tank. When i got home i tried to put the front passenger side window up and it wouldnt work, the rear left hand side either, but the right hand side of the cars windows would work?"!?! I turned the engine off and then restarted it the gagues were still not working but the car cut out after 5 seconds, i re started the car and the same thing happened but i noticed that the computer had gone off and now said _ _ _ miles left in the tank and the miles until next service was also blank. I turned the car off and now it wont start, it triews to but wont actually start, also the key fob wont open or close the doors but the key does the job by using it manually.....
I am just so worried, like most people i am totally skint to be polite and when i spoke to the main dealer they siad im looking at least £250 for the diagnosis... Please someone tell me that there may be a minor problem and an easy solution

let me guess though your going to either say youve never heard of anything like it and you all think its a gonner???
thank you hayley!

gazjeep · « **Reply #1 on:** November 12, 2010, 08:36:21 PM »

First things first, where abouts are you ?

Sounds like its gone beyond the usual Jeep reset but it wont hurt to disconnect the battery for a couple of minutes, then reconnect & see if this clears any faults.

Wait for Mike Pavlin to see your post & he'll give the best advice.

BTW, dont forget to say hi in introductions, always helps

Welcome to Birty's

tim_aka_tim · « **Reply #2 on:** November 12, 2010, 08:40:10 PM »

Sounds disturbingly like a problem I had - dead cell in the battery. When you don't have enough volts,
the computer and gauges go nuts. Just a possibility. Put a meter on the battery, should read 12v or more.

mipple · « **Reply #3 on:** November 12, 2010, 08:43:50 PM »

Hi
sorry i forgot to say im in halesowen birmingham.
~ill pop by and say hi in introductions now, i literally have no clue what im doing but i just cant cope with having to pay out a fortune again and as i have no clue i always seem to get the mechanic that takes total advantage of this!
thanks hayley

gazjeep · « **Reply #4 on:** November 12, 2010, 08:46:38 PM »

Well your in a good area, plenty of Birty's in & around Birmingham area.

Dont get spending your cash just yet

Dutch · « **Reply #5 on:** November 12, 2010, 11:33:11 PM »

Hi Hayley,

Sorry to hear that ye old GC 2.7 CRD is giving you such a head ache. How many miles has the truck done. Not that that matters but just out of curiosity.

I've had one for nearly four years now and apart from the usual (injector, gearbox computer update) I has not missed a beat. Oooops forgot to say that it is going to the Jeep Garage tomorrow (in limp home mode) to sort an uncooperative brakelight switch

I find it hard to believe that a hook-up to the dealer computer is £250,- That must be BS. When my gearbox needed an update they hooked it up and downloaded new software + coffee & carwash for £ 35'ish.

As for fuel gauge/overhead computer I wouldn't worry too much. Every time my fuel gauge approaches 1/4 tank it goes haywire. One moment it can be ok and when I start next it shows completely empty with 0 miles to go on the computer. I know I can do 380 miles easy on a full tank so with a mileage reset at every fuel stop I'm not to bothered.

Hope that Dr Mike can chime in with some solutions for ya.

Cheers.

mipple · « **Reply #6 on:** November 13, 2010, 09:58:26 AM »

Hi dutch,
i think were on about 85k miles by now, are you in birmingham too? what garage do you go to? the one i go to is not far from barnt green, was literally 2 mins away when i first bought the car but they obviously knew id bought one and moved lol how rude!!
The computer thing normally goes a bit nuts i have 44 miles of diesel left then all of a sudden i have 0 which iv got used to but this time it doesnt say any mileage just dashes were the numbers were and the miles till service has done the same, no noise to tell me i need one, no numbers showing to say how many miles left just dashe like this..... _ _ _ miles til service.
Weve taken the battery off and its going to be charged all day maybe night today, do i just get someone else to attach their battery to my car and see if it sorts itself out? if it suddenly is revived i take it that i need a new battery?? ANy ideas if i need to take another mortgage out like normal??
I cant believe what bad luck i have had with this car i really cant, from tyre nearly falling off, fuel pump/injectors breaking, heating concking out, window breaking and having to be taped up (yes tramp i know but stoney broke means no choice) to the left indicator working only when the hazards are flashed a few times first, then he died totally and the ecu had to be replaced...now this..its always when im going on holiday or taking the kids somewhere aswell inconveniently!!
I def need doctor mike your all talking about surely for such a man with said reputation he should have a bleeper on him at all times like a & e lol
I really hope someone can help!
h x

Dutch · « **Reply #7 on:** November 13, 2010, 12:54:55 PM »

Hello,

Not anywhere near Brum I'm afraid (which some people on here might consider a good thing

)

I'm in Truro, Cornwall, and btw mine seems to mend itself

No probls driving to the Garage this morning. Must be like going to my dentist. When I go my tooth doesn't hurt anymore

Good luck.

thorna · « **Reply #8 on:** November 13, 2010, 01:03:05 PM »

Hi;
For the moment keep your purse closed; its really easy to rack up big bills with Jeeps especially when main dealers are involved; but theres always a slightly cheaper way of fixing them; but may take a couple of days extra & get creative.
Grand Cherokees do seem quite 'fragile' so its especially the case; but for example the heater blowers in mine stopped working, 30mins on the internet & I'd found the cause & part ordered from ebay US. 5 days later, 20mins with the screwdrive & £100 and all done; I dread to think what the numpties at the Daimler dealer wouldve charged.
I'm hoping your prob may just be battery related; they go crazy when the battery is on its way out.
If you haven't got a multimeter etc, do you have breakdown cover with homestart; they can diagnose somthing simple like the battery?

For SAS jeeps look on Facebook. Not used them myself.

jond · « **Reply #9 on:** November 13, 2010, 01:46:23 PM »

ive had a few probs with my jeep cherokee since i bought it ,like no front propshaft fitted so no 4wd,and only gettin about 12mpg at the mo so i know what u are goin through,i bought a code reader for 25 quid of fleabay (obd11 code reader i think) ,dead easy to use and its highlighted where my problems regarding mpg issues are ,you can then ask here on the forum for help like i did and you will have the fault codes,hope it is just your battery,cheers jon

Dutch · « **Reply #10 on:** November 13, 2010, 03:51:07 PM »

To display fault codes :

Turn ingnition key 5 x on and of in very quick succession.

With the amount of problems you are experiencing keep pen and paper ready.

The fault codes will be displayed one after another in the digital odometer display.

Either list them here or have a look on : http://wjjeeps.com/faultcodes.htm

Bulldog67 · « **Reply #11 on:** November 13, 2010, 05:48:24 PM »

oooooh check out Dutch: u old tech head

Dutch · « **Reply #12 on:** November 13, 2010, 05:55:05 PM »

Oh yeah.....I'm on a roll

Panic mechanic! · « **Reply #13 on:** November 13, 2010, 05:58:33 PM »

they got an obd2 socket?

Dutch · « **Reply #14 on:** November 13, 2010, 07:01:50 PM »

Quote from: Panic mechanic! on November 13, 2010, 05:58:33 PM

they got an obd2 socket?

[attachment=1]

Panic mechanic! · « **Reply #15 on:** November 13, 2010, 07:09:58 PM »

I could pop round with Tanks obd2 scan tool and read all the errors off ( yes I know I will get it back to you one day tank but its being so dam useful at the moment! ) I am only by Junction 4 M5

mipple · « **Reply #16 on:** November 13, 2010, 07:14:55 PM »

hey....
whilst making a blooming birthday cake i got this message and went out to try it....
this is what i got......
p0340
p652
p685
come on hit me with it boys....its dead or in need of a lottery win isnt it!??!?!

hayley x

Panic mechanic! · « **Reply #17 on:** November 13, 2010, 07:20:41 PM »

Quote from: mipple on November 13, 2010, 07:14:55 PM

hey....
whilst making a blooming birthday cake i got this message and went out to try it....
this is what i got......
p0340
p652
p685
come on hit me with it boys....its dead or in need of a lottery win isnt it!??!?!
hayley x

po350 is cam shaft sensor

not sure what the others are supposed to be unless the 685 one is skim invalid key

mipple · « **Reply #18 on:** November 13, 2010, 07:23:54 PM »

ok im sorry to ask again, but is that major serious?? Sounds expensive...have you had to sort anything like that out before?
hayley x
ps is tank called alan by any chance?

mipple · « **Reply #19 on:** November 13, 2010, 07:37:12 PM »

god sorry i forgot the 1's in front of the numbers.....so...
p1685
p1652 and
p0340
heeelllpppp??
h x

Tank · « **Reply #20 on:** November 13, 2010, 07:41:34 PM »

No its Mike
P0340 (M)

Camshaft Position Sensor A Circuit (Bank 1 or Single Sensor)

A rationality error has been detected for loss of camshaft position sensor (no fuel sync). WJ 1999 &' 2000: Check the camshaft target wheel (located on the right side camshaft sprocket) for damage or excessive runout. The runout is very critical for proper camshaft signal input to the JTEC. The lateral runout on the target wheel should not exceed 0.012 inch.

P1685

Skim Invalid Key

The engine controller has received an invalid key from the SKIM.

P0685

ASD Relay Control Circuit

An open or shorted condition detected in the ASD relay control circuit.

Couldnt find other

mipple · « **Reply #21 on:** November 13, 2010, 07:45:54 PM »

sorry mike, i knew a guy called tank thats why i asked lol
so from what youve put...
what does it actually mean, any idea? also any suggestion or recommendation of who to go to?
thanks again
hayley x

Tank · « **Reply #22 on:** November 13, 2010, 07:47:56 PM »

Im afraid im good at breaking them but not fixing them,but im sure there will some more answers later

Mike Pavelin · « **Reply #23 on:** November 13, 2010, 07:49:42 PM »

P0340 on a diesel could be cam or crank sensor or circuit failure. It may be worth disconnecting both of these and seeing if everything else comes back tio life (it still wont run) as failed sensors have been known to cause the data bus to shut down blocking all the computers and generally causing havoc.

mipple · « **Reply #24 on:** November 13, 2010, 07:58:24 PM »

thanks mike,
any ideas where that is?? im a stupid girl who knows nothing but ill have ago!! also will the engine not run due to the key fault you think? iv tried both keys now, the spare wont do anything either, you think it needs to go to jeep main dealer?
h x

Author Topic: help pls..no clue whats going on with mental car??????? (Read 14325 times)

mipple

mipple

mipple

thorna

jond

Panic mechanic!

Panic mechanic!

mipple

Panic mechanic!

mipple

mipple

Tank

mipple

Tank

Mike Pavelin

mipple