April 21, 2025, 05:10:29 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
axle upgrade info help wanted please
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: axle upgrade info help wanted please (Read 4122 times)
0 Members and 1 Guest are viewing this topic.
mad wolfie
Guest
axle upgrade info help wanted please
«
on:
November 28, 2010, 11:03:59 PM »
my mate wants to scrap his standard yj dana 30/35 axles on his 1993 yj and replace them with dana 44's can you please let us know of what year / model donor motor we need to do this or are there other options available like toyota axles
?
cheers .....kev......
Logged
wildwood
The 1 Tonne Kid
Marshal
Guru
Guru: 14
Offline
Posts: 5921
Re: axle upgrade info help wanted please
«
Reply #1 on:
November 29, 2010, 09:41:03 AM »
FSJ Wagoneer axles from early 80's with left side drop same spring perch distance WMS and stronger tubes........
Dana 60 Ford F250 front (has left side drop) with rear matching Dana 60 ..........much much more work....
Sadly both fronts very rare in UK.......... been looking for 4 years .......gave up..... now Gone 60 (Chev right hand drop) and 14 bolt
Logged
mad wolfie
Guest
Re: axle upgrade info help wanted please
«
Reply #2 on:
November 30, 2010, 04:34:22 PM »
cheers what about dana 44, and what donor motor has them ....kev....
Logged
tim_aka_tim
Club Member
Guru
Guru: 1
Offline
Posts: 4464
Vehicle: Honda Pilot
Year: 2008
Regional Organiser North America
Re: axle upgrade info help wanted please
«
Reply #3 on:
November 30, 2010, 04:53:44 PM »
Fronteras have a 44 rear, and pre 95 ones have leaves. 95 onwards got coils.
As for a front 44, only what fj said - FSJs. Some TJs had 44 fronts (Rubicon models).
Various US Dodge and Ford trucks had a 44 front.
Logged
isle of man
بعض العضو التناسلي النسوي...
Club Member
Guru
Guru: 6
Offline
Posts: 11537
Vehicle: G-Class AKA “The G spot”
Take the road less travelled...
Re: axle upgrade info help wanted please
«
Reply #4 on:
November 30, 2010, 04:55:22 PM »
Fronteras although dana are not the same!!!!
Logged
"Not all those who wander are lost"
mad wolfie
Guest
Re: axle upgrade info help wanted please
«
Reply #5 on:
November 30, 2010, 04:59:35 PM »
what about later grand Cherokee would they not fit what axles are on the GC ....kev.....
Logged
wildwood
The 1 Tonne Kid
Marshal
Guru
Guru: 14
Offline
Posts: 5921
Re: axle upgrade info help wanted please
«
Reply #6 on:
November 30, 2010, 05:30:07 PM »
GC Dana is a hybrid and has C-clip axles.............I know cos I stripped one for the disc brake conversion to a Dana 44
There a member on here 'Cleggy' I think.........that has Nissan Patrol axles on his TJ come with lockers and are stronger than 44s
One of the Dutch that used to come to Tong had 'em as well and they stood the abuse of 38s
Logged
isle of man
بعض العضو التناسلي النسوي...
Club Member
Guru
Guru: 6
Offline
Posts: 11537
Vehicle: G-Class AKA “The G spot”
Take the road less travelled...
Re: axle upgrade info help wanted please
«
Reply #7 on:
November 30, 2010, 06:16:19 PM »
How strong to do you want?
I recently purchase a king pin (passenger pumpkin) dana 70 front and a dana 80 rear I believe the guy had some more sets available - cheap beef at £700gpb a set with 5.13 gears and 35 spline shafts - foooooking huge though would need 40"+ tyres for them.
Want me to find the details?
Logged
"Not all those who wander are lost"
Dave69
Club Member
Guru
Guru: 15
Offline
Posts: 9457
Vehicle: CJ-7 4.2 auto
Year: 1979
Re: axle upgrade info help wanted please
«
Reply #8 on:
November 30, 2010, 08:04:38 PM »
what size tyres/rims do you intend to fit as this could be a deciding point on what sort of axle you might need to look for
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
mad wolfie
Guest
Re: axle upgrade info help wanted please
«
Reply #9 on:
December 01, 2010, 04:59:43 PM »
running 35'' BFG muds tyres just sick of breaking little dana 35 need a bit more strength ........kev........
Logged
Mike Pavelin
Guest
Re: axle upgrade info help wanted please
«
Reply #10 on:
December 03, 2010, 09:11:12 AM »
All UK TJs have 44s on the rear.
Logged
wildwood
The 1 Tonne Kid
Marshal
Guru
Guru: 14
Offline
Posts: 5921
Re: axle upgrade info help wanted please
«
Reply #11 on:
December 03, 2010, 10:01:37 AM »
I've run 35s on rocks and stuff for the last 4 years no issue with the Dana 44........ but you can pony up for Warn shafts if you need
The front Dana 30 just needs either Warn or Superior inners and outers....... again no issue for 4 years until this year when I removed steering stops for tighter turning and gave it the beans under throttle with full lock........ and then only UJ not shaft damage.... unlike crown parts that I have grenaded inner and outer and UJ doing this..........
Logged
mad wolfie
Guest
Re: axle upgrade info help wanted please
«
Reply #12 on:
December 03, 2010, 04:38:46 PM »
cheers guys ...kev....
Logged
isle of man
بعض العضو التناسلي النسوي...
Club Member
Guru
Guru: 6
Offline
Posts: 11537
Vehicle: G-Class AKA “The G spot”
Take the road less travelled...
Re: axle upgrade info help wanted please
«
Reply #13 on:
December 03, 2010, 04:40:38 PM »
What about these axles?
http://cgi.ebay.co.uk/iveco-ford-daily-4x4-camper-project-spare-repars-/190474303107?pt=UK_Commercial_Trucks&hash=item2c59273683
Logged
"Not all those who wander are lost"
Bulldog67
Arthur Daley: Graduated
Guru
Guru: -936
Offline
Posts: 25395
Vehicle: Man Sized Old Iron
Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: axle upgrade info help wanted please
«
Reply #14 on:
December 03, 2010, 05:17:46 PM »
ooooh
Logged
Bulldog's 22+ trucks:
http://www.birtydastards.com/frm/index.php?topic=20288.0
401 Dog * 401 Molotov
Civilise the mind but make savage the body
Im only responsible for my karma
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
Re: axle upgrade info help wanted please
«
Reply #15 on:
December 03, 2010, 06:11:50 PM »
A Chrysler 8.25 axle as fitted to most 2.5 petrol XJs will stand up to 35s if you fit a full locker (ARB, Detroit etc.) and 29 spline alloy shafts. I suspect it will handle more than 35s if driven carefully, it has twice the material and beef of a Dana 35 as I found out when swapping one into my XJ and broke a toe
Logged
Bulldog67
Arthur Daley: Graduated
Guru
Guru: -936
Offline
Posts: 25395
Vehicle: Man Sized Old Iron
Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: axle upgrade info help wanted please
«
Reply #16 on:
December 03, 2010, 06:15:39 PM »
are we related?
Logged
Bulldog's 22+ trucks:
http://www.birtydastards.com/frm/index.php?topic=20288.0
401 Dog * 401 Molotov
Civilise the mind but make savage the body
Im only responsible for my karma
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
Re: axle upgrade info help wanted please
«
Reply #17 on:
December 03, 2010, 06:18:28 PM »
Logged
Bulldog67
Arthur Daley: Graduated
Guru
Guru: -936
Offline
Posts: 25395
Vehicle: Man Sized Old Iron
Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: axle upgrade info help wanted please
«
Reply #18 on:
December 03, 2010, 06:22:22 PM »
Logged
Bulldog's 22+ trucks:
http://www.birtydastards.com/frm/index.php?topic=20288.0
401 Dog * 401 Molotov
Civilise the mind but make savage the body
Im only responsible for my karma
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
axle upgrade info help wanted please
Powered by
EzPortal
Go Up
Go Down