Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2   Go Down

Author Topic: A tale of woe update part 1. 2003 2.7crd  (Read 9936 times)

0 Members and 1 Guest are viewing this topic.

tony750cc

  • Guest
A tale of woe update part 1. 2003 2.7crd
« on: December 06, 2010, 08:41:30 PM »

Well its almost 2 months now being without the jeep. After the ECU failed it was sent to an Autoelectricians in Cardiff who initially was adamant it wouldnt be the ecu....even though i was pretty sure it was....after about 2 weeks of testing and various tinkering he decided the ecu needed to be sent for test/repair. It was sent to BBA-Reman, took them almost 2 weeks to send it over to Germany to Bosch for additional testing. Final verdict....its buggered. Eventually they send old unit back so i start the hunt for the right replacement ecu.....sounds easy??? wrong!! it has to be from a 2003 model as nothing else will fit. Tried every jeep breaker i can find, tried posting ads on all the parts finder type sites....despite several leads all of them turned out to be different part numbers. I even tried jeep.....not one in the UK and he didnt think it was even still available....and if he did mange to find one its almost 700 pounds. So im left with a 7 year old jeep that is almost worthless and possibly not fixable unless i get real lucky. Not a great situation to be in! If anyone else has any ideas on parts the Bosch number is 0281 011 094 the second load of numbers P56044 418AB. Otherwise i may be breaking a really nice jeep except it wont run!
Logged

Mike Pavelin

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #1 on: December 06, 2010, 09:12:02 PM »

You should bypass the dealers and call up Jeep UK customer services.
Logged

300bhp/ton

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #2 on: December 07, 2010, 12:44:57 PM »

Just curious, but what's the reason you can't use an ECU from a different year? Are they different engines or won't it physically plug in?

Have you looked into the possibility of some form of custom aftermarket ECU? I know it's not ideal, but it might be an option if you truly can't find an other alternative.
Logged

tedthefed

  • Club Member
  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 1222
  • Vehicle: JLUR
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #3 on: December 07, 2010, 07:36:44 PM »

Try JeepSpares4u.  01455209950.
They did have a couple of Grands the other week.
Logged
opps didn't see that

jay140285

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #4 on: December 08, 2010, 02:12:17 PM »

As mentioned, can you not get an ECU bespoke made to match your requirements.

I had a Megasquirt ECU custom made for one of my cars (mazda MX5 MK1 Turbo) requirements, specifically designed to suit my custom Turbo install.

Should cost alot less. Off the top of my head try Link ECU or Megasquirt. I know of a Range Rover running Megasquirt and it was designed to increase the cars power. 

James.
Logged

eastryjeep

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #5 on: December 08, 2010, 04:34:34 PM »

Just as a word of warning.
You should check this sparky isn't going to charge "storage" at the end of all this if he either can't fix it or you find some other route out of your misery that he can't profit from.
Any 'Ummming' or 'Eerrrrrring' on his part and you might suggest taking the vehicle home 'to give him room' (Red Dragon Recovery or similar) until he can fix it at a mutually agreed time in the future.
That is not to say he really will ever see it again it just keeps you in control of the costs.
Logged

Mike Pavelin

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #6 on: December 08, 2010, 08:34:04 PM »

As mentioned, can you not get an ECU bespoke made to match your requirements.

I had a Megasquirt ECU custom made for one of my cars (mazda MX5 MK1 Turbo) requirements, specifically designed to suit my custom Turbo install.

Should cost alot less. Off the top of my head try Link ECU or Megasquirt. I know of a Range Rover running Megasquirt and it was designed to increase the cars power. 

James.
They wouldn't be able to replicate this one. Too complex.
Logged

Mike Pavelin

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #7 on: December 08, 2010, 08:36:00 PM »

By the way, who diagnosed it? Jeep ECUs are about the most reliable on the planet.
Logged

tony750cc

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #8 on: December 09, 2010, 10:04:29 AM »

The ecu was sent to BBA-Reman who sent it off to Bosch, they diagnosed it as faulty. Ive read on other sites and from one of the breakers that it has to be an exact part, the unit fitted to the 2003 model is different to the 2002, 2004 modesl etc.
Shame about the megasquirt idea as id hoped that may be a possibility.
Im going to have to go back to jeep and start the ball rolling for a new ecu or it gets broken for spares or repairs, im reluctant to do this as i face a potential to take a huge loss on it!
Logged

tony750cc

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #9 on: December 09, 2010, 10:19:38 AM »

And tried Jeep spares, they dont have one! he did say the ecu would be specific to that year as the numbers would be different.
Logged

eastryjeep

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #10 on: December 09, 2010, 11:29:39 AM »

Sorry if I'm going over old ground, but if you DID change the ECU for a different year what other parts would need to be swapped out?
Is this feasible, as we seem to be looking at some major costs or loss of a reasonable vehicle otherwise.
Are we talking of a few black boxes and some looming or the whole power plant?

Any ideas Mike?
Logged

Lornaben

  • Lord of the Mindy ring
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 3026
  • Vehicle: CJ3B (Mindy)
    • Mahindra Register
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #11 on: December 09, 2010, 11:42:21 AM »

You should bypass the dealers and call up Jeep UK customer services.
:iagree:

Mike Pavelin

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #12 on: December 09, 2010, 07:48:05 PM »

The 2.7 was only available for '02,3 and 4 model years. Personally, I can't see why one from any of the 3 years wouldn't work. HOWEVER, they are not plug and play. You would have to get a Jeep dealer to reprogram the security system, set up the injector tolerances and load any software updates. A i have alerady suggested, a call to Jeep customer services would possibly produce the elusive component.   
Logged

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #13 on: December 10, 2010, 10:21:51 AM »

Calling Jeep Customer Services can't hurt - Mike knows what he's talking about too  :greggmo:
Logged

300bhp/ton

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #14 on: December 10, 2010, 01:59:46 PM »

The ecu was sent to BBA-Reman who sent it off to Bosch, they diagnosed it as faulty. Ive read on other sites and from one of the breakers that it has to be an exact part, the unit fitted to the 2003 model is different to the 2002, 2004 modesl etc.

Have you tried any other ECU's? Not saying they will work, but if in doubt I can't see the harm with trying and seeing, even more so if you can get a 2nd hand one on a return basis.
Logged

Panic mechanic!

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #15 on: December 10, 2010, 03:55:40 PM »

how about taking a pic of th ecu and posting it on here and fellow jeepers can see if they run a similar ecu or if the one they have has the same connectors?
Logged

Mike Pavelin

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #16 on: December 10, 2010, 04:20:12 PM »

It's unique to the 2.7.
Logged

Panic mechanic!

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #17 on: December 10, 2010, 04:36:11 PM »

ok as its a merc engine would it be useful contacting them?
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #18 on: December 10, 2010, 04:37:37 PM »

please do as mike says he is the best person to know for theis era truck
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Mike Pavelin

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #19 on: December 10, 2010, 04:44:46 PM »

ok as its a merc engine would it be useful contacting them?
No, It's a unique unit designed to interface Chrysler and Mercedes technology.
Logged

Panic mechanic!

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #20 on: December 10, 2010, 04:47:09 PM »

OK i only suggested it as the sprinter runs the same engine as it was an evolution of OM612 Diesel I5 , thought it was a long shot but worth mentioning. oh well.
Logged

Mike Pavelin

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #21 on: December 10, 2010, 05:19:02 PM »

Most of the engine parts do interchange and are cheaper from Mercedes, but the electrics are an expensive nightmare.
Logged

Dutch

  • The Curator
  • Club Member
  • Forum Member
  • *
  • Guru: 12
  • Offline Offline
  • Posts: 5798
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #22 on: December 10, 2010, 06:58:16 PM »

how about taking a pic of th ecu and posting it on here and fellow jeepers can see if they run a similar ecu or if the one they have has the same connectors?


More than happy to have a look, if I know what I'm looking for. :icon_winkle:
Logged

Jeepless :-( 2006 Chrysler Crossfire Roadster 3.2 V6 - 1993 Yamaha FJ1200

tony750cc

  • Guest
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #23 on: December 14, 2010, 02:36:45 PM »

well have been back to Jeep this time got a bit more positive response the part was located after about 20 minutes of phone calls etc, funny enough it was the exact part number that i had supplied him minus the first character, so at least im confident we have got the right bit. I have ordered a new ecu (697.50 plus vat) which should be here by early next week (they are coming from germany). I did enquire with them about setting it up they wanted 150 plus vat, the auto electrician wants 80 so i think it will be going back to him. Im now over a thousand pounds down on the car.
Im really hoping that it was the ecu that failed first and that caused all the other weird insturment readings...not something else that could potentailly happen again and wreck my new (expensive ecu). unfortunately the only way i can see to test it is to fit it and try it..........im keeping fingers crossed, but despite what seems to be the consensus of opinion i dont think its going to work!! ive got a bad feeling that something else is going wrong here! hope im wrong!
i will update again!
Logged

Dutch

  • The Curator
  • Club Member
  • Forum Member
  • *
  • Guru: 12
  • Offline Offline
  • Posts: 5798
Re: A tale of woe update part 1. 2003 2.7crd
« Reply #24 on: December 14, 2010, 03:28:09 PM »

I have ordered a new ecu (697.50 plus vat) which should be here by early next week (they are coming from germany). I did enquire with them about setting it up they wanted 150 plus vat, the auto electrician wants 80 so i think it will be going back to him. Im now over a thousand pounds down on the car.

Tony, hope it works out for you.  I would imagine that a stealer repair would be under warranty when it goes 'pop' again, does the other bloke give warranty as well ?

As far as costs go if the truck is back to 100%....£1000 will not buy you a truck with that level of looks, style, comfort, off-road capabilities, gizmo's etc.....

that's how I always fool myself into believing that the cost is warranted  :icon_rolleyes:
Logged

Jeepless :-( 2006 Chrysler Crossfire Roadster 3.2 V6 - 1993 Yamaha FJ1200
Pages: [1] 2   Go Up
 

Powered by EzPortal