Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: CJ6 Body Mounts  (Read 1284 times)

0 Members and 1 Guest are viewing this topic.

IrishCJ6

  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 1033
CJ6 Body Mounts
« on: December 15, 2010, 12:56:19 PM »

During my tear down of the jeep I noticed that the body mounts did not look factory (odd size hole and bolt combo in the mount), can anyone tell me the corect sizes that the mounts are and where to get a set of replacement ones from or what to make a set from, I'm also thinking I need a 1" lift just to clear a couple of mods I've made so far. Any help would be appreciated.
Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Forum Member
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: CJ6 Body Mounts
« Reply #1 on: December 15, 2010, 01:43:11 PM »

I just ordered up a set from Daystar...........via Quadratec in the US

The 1 inch lift I had done by a local guy who 'ballony cut' some solid ally and drilled it for me...........use your original bolts and order up 1 inch longer

cheaper and better than wobbly 1 or 2 inch plastic lift blocks.
Logged

eastryjeep

  • Guest
Re: CJ6 Body Mounts
« Reply #2 on: December 16, 2010, 01:29:04 PM »

Get some Ford Sierra engine mounts or similar from a motor factor and save a bunch of notes!
Just make sure you get 3/8" BSW threads NOT M10 or it won't match.
Then again:
Any anti vibration mounting should do the trick, I seem to remember "Stopchoc" do a wide variety, I'll probably use them myself when I put my CJ7 back together!
Logged

Dutch

  • The Curator
  • Club Member
  • Forum Member
  • *
  • Guru: 12
  • Offline Offline
  • Posts: 5798
Re: CJ6 Body Mounts
« Reply #3 on: December 16, 2010, 05:41:37 PM »

We do business with http://www.vibracoustics.com/

for all our floating mounts stuff.

Just a tip.
Logged

Jeepless :-( 2006 Chrysler Crossfire Roadster 3.2 V6 - 1993 Yamaha FJ1200

IrishCJ6

  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 1033
Re: CJ6 Body Mounts
« Reply #4 on: December 16, 2010, 08:02:35 PM »

We do business with http://www.vibracoustics.com/

for all our floating mounts stuff.

Just a tip.

Thanks for the link, some usefull bits, I may enquire into the rail sandwich mounts as I could then fabricate my mounts to exactly the right height I want, I'll give them a buzz tomorrow.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal