Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Removing oem side repeaters....jeep kj  (Read 1364 times)

0 Members and 1 Guest are viewing this topic.

Southside Jeep

  • Guest
Removing oem side repeaters....jeep kj
« on: January 02, 2011, 08:09:08 PM »

how do you get those little orange side repeaters off the car.... there must be an easy way or a specific part to pull/twist/flick... :ecomcity:

please help?
Logged

Nosebolt

  • Guest
Re: Removing oem side repeaters....jeep kj
« Reply #1 on: January 02, 2011, 08:16:36 PM »

chainsaw would work :003:
Logged

big g

  • Guest
Re: Removing oem side repeaters....jeep kj
« Reply #2 on: January 02, 2011, 08:29:52 PM »

Don't own anything as modern but logic suggests as follows.........
It should be secured on inside of wing which will be hidden by plastic inner arch likelies.

So for ease tap it with a knocking stick.A 3lb club head should suffice.
Logged

Mike Pavelin

  • Guest
Re: Removing oem side repeaters....jeep kj
« Reply #3 on: January 02, 2011, 09:06:26 PM »

Slip a credit card or plastic filler spreader under the edges of the lamp to release the clips.
Logged

Tragic

  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 843
  • Vehicle: A proper Jeep!
  • Year: 1993
Re: Removing oem side repeaters....jeep kj
« Reply #4 on: January 03, 2011, 07:50:38 PM »

 :imwitstupid:
They are a very tight fit in the wing and they're made of the hardest / most brittle plastic known to man :jpshakehead:
There are 2 tags on the back of it, one solid and one 'flexible' :hysterical:. Slide a thin plastic blade under the front edge and swear alot
Logged

momos

  • Guest
Re: Removing oem side repeaters....jeep kj
« Reply #5 on: January 03, 2011, 08:28:12 PM »

why take them off?  :017:
Logged

Mike Pavelin

  • Guest
Re: Removing oem side repeaters....jeep kj
« Reply #6 on: January 03, 2011, 08:29:38 PM »

Bet you he's bought LEDs
Logged

momos

  • Guest
Re: Removing oem side repeaters....jeep kj
« Reply #7 on: January 03, 2011, 08:33:00 PM »

dont u need to keep some parts intact to just swap front plate and bulb? and he might wack it


oh that sounds abit techy for me....i see blue flashers and clear plastic bits  :017:
Logged
Pages: [1]   Go Up
 

Powered by EzPortal