July 13, 2025, 03:16:14 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
4.0l engine queries
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: 4.0l engine queries (Read 2617 times)
0 Members and 1 Guest are viewing this topic.
supersparks
Guest
4.0l engine queries
«
on:
June 05, 2011, 05:39:21 PM »
hi all i have a 2002 wj with 70000 miles done last 20000 on lpg with full service history. there is a slight tapping from the top end and what sounds like an exhaust manifold blowing but after changing the gasket and fitting a different manifold the noise is still there . my real question is is there any real known common problems to give these symptoms like hydraulic lifters , soft cam lobes, compression problems etc.
Logged
daggie
Moderator
Guru
Guru: 3
Offline
Posts: 3447
Re: 4.0l engine queries
«
Reply #1 on:
June 05, 2011, 05:50:58 PM »
lazy lifters ? that all I can think of, on of ours does it
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie P38 range rover
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
Re: 4.0l engine queries
«
Reply #2 on:
June 05, 2011, 06:12:40 PM »
Mine's always had a slight top end tapping sound, from 67K miles when I got it to 140k miles now, not got any worse, last 65k miles on LPG.
Logged
Dave69
Club Member
Guru
Guru: 15
Offline
Posts: 9457
Vehicle: CJ-7 4.2 auto
Year: 1979
Re: 4.0l engine queries
«
Reply #3 on:
June 05, 2011, 07:57:31 PM »
have you done an engine flush and new oil ? can solve the problem
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
allante666
Guest
Re: 4.0l engine queries
«
Reply #4 on:
October 02, 2011, 11:25:33 AM »
Metallic tapping, sounds like one stuck lifter, worse when cold but gradually gets quieter as it warms up to normal temp. Still audible when hot and louder on acceleration? Piston slap! Have it on mine, tried everything to diagnose it until I finally had the head off and had a look.
It will eventually wear the cylinder elliptical. The other, but just as bad, cause can be the piston skirt breaking up. (metal chunks in the oil pan is a sign)
Ive done loads of investigating into this to try and convince myself it was just a lifter but sadly not.
Mine still runs ok but I have got another engine on its way!
If this fits your symptoms give me a shout if theres anything you want to know about it. It fairly common, just go on youtube and search for jeep piston slap, theres loads of videos of it.
Logged
supersparks
Guest
Re: 4.0l engine queries
«
Reply #5 on:
October 02, 2011, 08:36:05 PM »
well what can i say thanks for the diagnosis of what i was hoping was a very small glitch, when you are actually telling me my engine is fubared. did you look into doing a rebuild with a bore and new pistons, if this is a common problem how do you know you are getting a decent replacement engine.mine has done 75000 miles with full dealer service and is running on proper expensive fully synthetic oil so my point is if this has gone what is the chance of finding a decent second hand engine
Logged
Mike Pavelin
Guest
Re: 4.0l engine queries
«
Reply #6 on:
October 02, 2011, 09:04:18 PM »
Stop worrying. If you think it's tappet noise, I'd reccomend an oil change followed by Forte' hydraulic tappet treatment. It really works.
Logged
Bishops Finger
Guest
Re: 4.0l engine queries
«
Reply #7 on:
October 02, 2011, 09:09:39 PM »
It will help if you remove the LPG system and advertise it for sale on a post card in your local post office.....
Logged
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
Re: 4.0l engine queries
«
Reply #8 on:
October 03, 2011, 09:28:55 AM »
Don't bother with expensive synthetic oil when you have an 80's tractor engine under the bonnet.
Logged
allante666
Guest
Re: 4.0l engine queries
«
Reply #9 on:
October 03, 2011, 07:08:53 PM »
Supersparks yes I briefly considered a rebuild but thought better of it. I reckon once you had paid for six pistons, rods, bearings, probably had the crank ground and a rebore it wouldnt have been financially viable.
How do I know the replacement engine isnt as bad? I dont. Im taking the guy at his word. watch this space..
Of course it could be a stuck lifter, you never know but if it fits my symptoms, its probably not. If you could disconnect each spark plug in turn and see if one stopped it, it would probably mean piston slap as the tapping noise is caused by the cylinder firing and the piston, being worn tilts in the bore so the skirt taps on the cylinder wall. with no spark on that cyclinder it wouldnt tap as the piston wouldl just be being moved up and down by the crank, hence why its quieter when you take your foot off.
I couldnt do that as I have the distributorless ignition with the single long coilpack but, as ive just realised as I type this (duh!) I suppose being lpg you could just clamp off the rubber hose to each injector in turn? not quite as accurate but should help diagnosis.
I still have some video clips I took of mine rattling and also the movement in the pistons which I took to send to a mechanic buddy of mine in the states if you want them.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
4.0l engine queries
Powered by
EzPortal
Go Up
Go Down