Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[big g]

any idea what tools I need to take and is there an easy way??

Ta in advance

[bigjeepzj]

They just pull out. But you have to pull hard
This is not ax wind up

[big g]

 

I'm removing the complete headlamp and out else I can grab not just the glass,is it the whole unit ya on about?

[bigjeepzj]

Yes the complete unit comes out there clipped in
It's a crappy set up

[big g]

Cheers bigZ,you da man

[Dutch]

If its the same set up as the WJ the whole thing is held in place by those ball-in clip thingies.

Balls on the light and clips in the bodywork.  Pull ever so slightly with constant pressure because if
you give it a yank you're likely to pull the plastic clips out of the body.  When they crack it is a royal PITA.

Put some grease or vaseline on when you re-fit.

[Bulldog67]

fnarrr fnarrrrr

[Bishops Finger]

Getting theside lights out are a big enough PITA...greasing seems a good idea...

[jay140285]

If its the same set up as the WJ the whole thing is held in place by those ball-in clip thingies.

Balls on the light and clips in the bodywork.  Pull ever so slightly with constant pressure because if
you give it a yank you're likely to pull the plastic clips out of the body.  When they crack it is a royal PITA.

Put some grease or vaseline on when you re-fit.

Second the above, its not nice applying that much pressure to the lights but its the only way.

[big g]

All advice spot on lads.
Fitting this weekend so will try the grease tip