Topic: SOA steering woes - full on tech advice needed please (Read 31447 times)

bigjeepzj · « **Reply #100 on:** December 26, 2011, 10:42:09 AM »

Know how you feel BD putting a log arm on my zj cost alot more than the kit as needed new props, Tcase (yes the atlas was an indulges) , re-gear, modified track arms and I still need to do more work to sort the steering to get rid of the dead spot
so keep carm and carry on

Panic mechanic! · « **Reply #101 on:** December 26, 2011, 11:52:27 AM »

Quote from: V8 Bubba on December 26, 2011, 10:08:00 AM

that much lift on almost anything brings tissues

corrected it for ya mate.

JamesH · « **Reply #102 on:** December 27, 2011, 04:13:51 PM »

Quote from: bigjeepzj on December 26, 2011, 10:42:09 AM

Know how you feel BD putting a log arm on my zj cost alot more than the kit as needed new props, Tcase (yes the atlas was an indulges) , re-gear, modified track arms and I still need to do more work to sort the steering to get rid of the dead spot
so keep carm and carry on

WJ steering conversion may help - with flipped inserts on the knuckles the drag link is at a much better angle, plus you gain dual piston brakes.

I doubt very much this any help to BD so sorry for the hijack - if WJ dana 30 knuckles do fit your axle it could be a route??

Bulldog67 · « **Reply #103 on:** December 27, 2011, 05:45:47 PM »

Do they fit - anyone?

Im all for easier options, altho i doubt it will be an option, far to convenient

dieselj20 · « **Reply #104 on:** December 27, 2011, 07:08:59 PM »

your track rod ends are already on top wj has totally different ends and bearing set up

Bulldog67 · « **Reply #105 on:** December 27, 2011, 07:58:18 PM »

I knew you would have the answer

could be a day to buy a lotto ticket as im bein so prophetic

Bulldog67 · « **Reply #106 on:** January 05, 2012, 06:18:41 PM »

keep ya fingers xd for 2mrw doods, we are givin the finger to engineerin workshops and goin home brew on turnin knuckles and shit like that

thanks to guilty parties on here

and threads on pirate

and probably fearless daftness

Lornaben · « **Reply #107 on:** January 05, 2012, 06:46:44 PM »

OMG

Bulldog67 · « **Reply #108 on:** January 05, 2012, 06:59:20 PM »

and just think dood, the first time you ever responded to a post of mine was to tell me what the fuck a shackle was

Bulldog67 · « **Reply #109 on:** January 05, 2012, 06:59:49 PM »

I have the faith in those around me

Bubba · « **Reply #110 on:** January 05, 2012, 07:01:56 PM »

yup cos you will be locked out of harms way

Lornaben · « **Reply #111 on:** January 05, 2012, 07:02:24 PM »

Quote from: Bulldog67 on January 05, 2012, 06:59:20 PM

and just think dood, the first time you ever responded to a post of mine was to tell me what the fuck a shackle was

look what I've started

We'll have you identifying spanners soon

Nosebolt · « **Reply #112 on:** January 05, 2012, 07:03:59 PM »

please take lots of pics, we need photo evidence of you in action

Lornaben · « **Reply #113 on:** January 05, 2012, 07:05:18 PM »

Bubba · « **Reply #114 on:** January 05, 2012, 07:05:32 PM »

did you not see him in last nights vid

Bulldog67 · « **Reply #115 on:** January 05, 2012, 07:06:14 PM »

Quote from: Nosebolt on January 05, 2012, 07:03:59 PM

please take lots of pics, we need photo evidence of you in action

errr define action

im only the dood at the kettle

Bulldog67 · « **Reply #116 on:** January 05, 2012, 07:08:05 PM »

I will have full clobber on tho

Lornaben · « **Reply #117 on:** January 05, 2012, 07:19:34 PM »

Quote from: Bulldog67 on January 05, 2012, 06:18:41 PM

keep ya fingers xd for 2mrw doods, we are givin the finger to engineerin workshops and goin home brew on turnin knuckles and shit like that

thanks to guilty parties on here

and threads on pirate

and probably fearless daftness

By 'we' you mean your the tea boy and someone else is doin the job then.

Bubba · « **Reply #118 on:** January 05, 2012, 07:21:01 PM »

yup but we do need lots of pics of the job

Bulldog67 · « **Reply #119 on:** January 05, 2012, 07:36:44 PM »

I will be the wing man

Pics if i remember but the cold may well numb my skull beyond and help

Bishops Finger · « **Reply #120 on:** January 05, 2012, 09:47:02 PM »

BD...assistant kettle operator...run away...

Bulldog67 · « **Reply #121 on:** January 06, 2012, 06:20:55 PM »

slow going, and semi success, but in part hit a brick wall as I need tied rod cup/cone shaped washer thingy, and steering rod bushes and metal washers - and lightys cant help

sullied myself by goin in a landy shop and they were fuckin useless, as were the local motor factors, as were screwfix (desperation by then) - so HELP

HELP please, where did ya get yours for old iron?

oh yeah, also flat top knuckles been ordered

Bulldog67 · « **Reply #122 on:** January 06, 2012, 11:45:09 PM »

No-one

Bubba · « **Reply #123 on:** January 07, 2012, 09:22:28 AM »

yup a few placees do a kit that has a reamer tool and the insert to fill the old taper in so you can flip the rods

Bulldog67 · « **Reply #124 on:** January 07, 2012, 09:23:21 AM »

and those places would be please?

Author Topic: SOA steering woes - full on tech advice needed please (Read 31447 times)

Panic mechanic!

dieselj20

Nosebolt

Bishops Finger