Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: TIH....  (Read 1742 times)

0 Members and 2 Guests are viewing this topic.

UKJeeper

  • Guest
TIH....
« on: March 04, 2012, 06:24:56 PM »

Previous owner installed a row of switches running various items, but all running off a single power and single earth, All spliced together with crappy blue wiretaps.  :doh:

So i've replaced it all with decent illuminated switches (Maplin) individual wires running from an aux fusebox so everthing has its own fuse, properly grounded, with a master switch. Properly crimped with heat shrink protection.

So across the panel, its now:

Master, Spare, Idle control master, ARB master, Code4, Aux rad fan, Fog, OBA.



Logged

paulesc

  • Guest
Re: TIH....
« Reply #1 on: March 04, 2012, 07:31:14 PM »

Like it:)
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: TIH....
« Reply #2 on: March 04, 2012, 07:31:53 PM »

Tim - must be something in the air!! Actually washed the Mafia today after two years, felt rather satisfying I suspect the sane for you.
Logged
"Not all those who wander are lost"

Bishops Finger

  • Guest
Re: TIH....
« Reply #3 on: March 04, 2012, 09:25:34 PM »

Good one UK....
Logged

UKJeeper

  • Guest
Re: TIH....
« Reply #4 on: March 07, 2012, 10:04:35 AM »

ARB switches (under speedo) now both upgraded to newer 'rocker' style switches and rewired. "Pit-scch"  :icon_super:
Logged

UKJeeper

  • Guest
Re: TIH....
« Reply #5 on: March 07, 2012, 08:49:14 PM »

This evening sorted the PIAA's out, and re-wired in the 'new' stereo. Just need to run new power wires to the amp (speaker wire installed by previous owner is NOT adequate power supply...  :wsmile: ) and i can cross 'toons' off the list.
Logged

Bulldog67

  • Arthur Daley: Graduated
  • Guru
  • *
  • Guru: -936
  • Offline Offline
  • Posts: 25395
  • Vehicle: Man Sized Old Iron
  • Anti Colour Truck Mafia - I'm The Fuckin Daddy
Re: TIH....
« Reply #6 on: March 07, 2012, 10:05:40 PM »

Important job done early  :icon_super:
Logged
Bulldog's 22+ trucks: http://www.birtydastards.com/frm/index.php?topic=20288.0 :025:                                   :headbanger: 401 Dog * 401 Molotov :headbanger:  
Civilise the mind but make savage the body  :027:           Im only responsible for my karma :059:

UKJeeper

  • Guest
Re: TIH....
« Reply #7 on: March 07, 2012, 10:08:54 PM »

Have also cleaned up, re-routed and run all the misc wiring criss-crossing the engine bay into conduit tubes. Much cleaner.

Logged

UKJeeper

  • Guest
Re: TIH....
« Reply #8 on: March 07, 2012, 10:15:32 PM »

Important job done early  :icon_super:

It showed me why i need to run a proper power supply to the amp. Cranking it up made the amp cut out due to lack of juice. A speaker wire running the current just doesn't cut it!
Logged

Bishops Finger

  • Guest
Re: TIH....
« Reply #9 on: March 07, 2012, 10:45:28 PM »

UK...this is worrying....it could be on the road soon..... :icon_super:
Logged
Pages: [1]   Go Up
 

Powered by EzPortal