July 16, 2025, 05:44:25 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Rubicon express control arms
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: Rubicon express control arms (Read 2518 times)
0 Members and 1 Guest are viewing this topic.
The Smiths
Guru
Guru: 1
Offline
Posts: 1084
Rubicon express control arms
«
on:
April 24, 2012, 10:55:05 AM »
wheres the best (cheapest/easy) place to get rebuild kits for the large superflex joints on lower control arms??
Also might as well get the tool for it at the same time.
Unless anyone has any for sale they no longer need
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund:
http://www.justgiving.com/The-Smiths-2015
bellysgonnagetchya
Guest
Re: Rubicon express control arms
«
Reply #1 on:
April 25, 2012, 10:53:28 AM »
I called Steve @ FTE a little while ago about kits to rebuild my Superflex joints and to be honest they were quite pricey! Worked out about £100 just to rebuild the rear uppers alone!
I may well buy a new set from the states (Not sure on make yet) and then sell the RE jobbies to get some £'s back!
Logged
johnboybop
Guest
Re: Rubicon express control arms
«
Reply #2 on:
April 27, 2012, 08:25:45 PM »
i tried steve at fte, can never get an answer so gave up now i buy rough country gear
from dave at laama 4x4, it was easier to buy new stuff then try and get new bushes
from fte, worst service ive ever had !!!!
Logged
isle of man
بعض العضو التناسلي النسوي...
Club Member
Guru
Guru: 6
Offline
Posts: 11537
Vehicle: G-Class AKA “The G spot”
Take the road less travelled...
Re: Rubicon express control arms
«
Reply #3 on:
April 27, 2012, 08:30:11 PM »
As you all know RE is no more!!
Logged
"Not all those who wander are lost"
The Smiths
Guru
Guru: 1
Offline
Posts: 1084
Re: Rubicon express control arms
«
Reply #4 on:
April 27, 2012, 11:14:04 PM »
Managed to speak to Steve at FTE who said that RE were up and running again - just not good at delivery price at the minute.
and that he would phone m back yesterday with some prices - but no calls as yet.....
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund:
http://www.justgiving.com/The-Smiths-2015
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
Re: Rubicon express control arms
«
Reply #5 on:
April 28, 2012, 06:23:23 PM »
Are the races definitely shagged? A full clean and grease usually did it for mine. I got the tool from Steve at FTE.
Logged
The Smiths
Guru
Guru: 1
Offline
Posts: 1084
Re: Rubicon express control arms
«
Reply #6 on:
April 28, 2012, 06:27:45 PM »
the races have gone, have cleaned and rebuilt it, but a difinite mark in them and started clunking again after a little trip
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund:
http://www.justgiving.com/The-Smiths-2015
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Rubicon express control arms
Powered by
EzPortal
Go Up
Go Down