Topic: Big Red 1 Ton Jeep purchase!!! (Read 16028 times)

big_patrol · « **Reply #50 on:** May 07, 2012, 09:12:07 AM »

So whats the issue with the np205? Is it just the restriction on gearing? Is this jeep still open diff?

Bulldog67 · « **Reply #51 on:** May 07, 2012, 09:16:18 AM »

did JJ's sell?

wildwood · « **Reply #52 on:** May 07, 2012, 01:52:03 PM »

mark and I looked over this quite carefully and then came away and did the research......

Body and chassis and suspension and cage ....100%

axles turned out to be Dana61 at the front which was done on the cummins rigs to get 3.07 gearing bastard expensive difficult to modify for deep ratios and lockers

Engine was a 318 which is as popular as a Chev 305

Guy had put a 360 cam in so unless other work done you got yourself a dog that'll go bang...... And it wasn't running right...

205 is bulletproof and can handle big block monter horses as a mud truck...... If you get yourself a trouble prone chain drive diff hampered 203 and just use the strong range box you then have 2:1 in each box or combo 4:1. Just need 799bucks to AA for the adapter.

So it was a no..... But worth a bit less and I think it might sell.......

And JJ sold his

isle of man · « **Reply #53 on:** May 07, 2012, 01:54:46 PM »

So it's a BRASS!!!

big_patrol · « **Reply #54 on:** May 07, 2012, 02:29:51 PM »

Good Job you knew what you were looking at then or could have been an expensive mistake

isle of man · « **Reply #55 on:** May 07, 2012, 02:39:35 PM »

Indeed could have been sucked dry and fooooooked sideways!!!

Warthog · « **Reply #56 on:** May 07, 2012, 03:01:32 PM »

The low range ratio of the 205 compared to a dana300, was killing the crawl ratio. This was evident when driving it.
Who builds a truck and doesnt know the r&p ratios of axles? Really needed to have the covers off the diff and tooth count.
Some things didnt add up until further investigation on tinternet.
As to the front axle, i couldnt get a 100% confirmation of it being a D60, but somethings didnt add up.

An excellant base truck, but with some grey areas in the driveline, that will need to be addressed. All fixable at a cost, but.....

isle of man · « **Reply #57 on:** May 07, 2012, 03:36:24 PM »

We in the UK don't crawl (strike one) the Buggy is so low geared it makes the engine scream, but due to import duty it had to have its tongue out at 30MPH.

Warthog · « **Reply #58 on:** May 07, 2012, 03:46:10 PM »

Quote from: isle of man on May 07, 2012, 03:36:24 PM

We in the UK don't crawl (strike one) the Buggy is so low geared it makes the engine scream, but due to import duty it had to have its tongue out at 30MPH.

"low range" was impaired in comparison to 1st low in the lardie. Its nice to be able to go slow and controlled and have available torque to climb etc.

isle of man · « **Reply #59 on:** May 07, 2012, 04:03:40 PM »

Quote from: Warthog on May 07, 2012, 03:46:10 PM

Quote from: isle of man on May 07, 2012, 03:36:24 PM
We in the UK don't crawl (strike one) the Buggy is so low geared it makes the engine scream, but due to import duty it had to have its tongue out at 30MPH.

"low range" was impaired in comparison to 1st low in the lardie. Its nice to be able to go slow and controlled and have available torque to climb etc.

I hear that...

Bulldog67 · « **Reply #60 on:** May 13, 2012, 09:51:05 PM »

Quote from: Warthog on May 06, 2012, 11:37:22 PM

Quote from: robsrotti on May 06, 2012, 11:25:07 PM
I like this truck, so how much are we talking about to have it sitting on the drive. Any guesses

7K

relisted with a 5k reserve

wildwood · « **Reply #61 on:** May 14, 2012, 12:20:59 PM »

tis a bugger cos that's 1k less than he was trying to rush Mark for

willo · « **Reply #62 on:** October 02, 2012, 08:33:22 PM »

truck has a new ~~muppet~~ owner and is now for sale again minus tyres, engine, tc and propshafts, yours for a bargain £3k satans spawn axle included

Cockney Boy · « **Reply #63 on:** October 02, 2012, 08:41:55 PM »

You got a link?

Warthog · « **Reply #64 on:** October 02, 2012, 09:06:18 PM »

Wondered how long it would take?

Would be interested in a linky to it......

willo · « **Reply #65 on:** October 02, 2012, 09:11:59 PM »

https://www.facebook.com/dave.lea.79/posts/351819344905382?notif_t=feed_comment_reply

Bulldog67 · « **Reply #66 on:** October 02, 2012, 09:15:20 PM »

bad linky

willo · « **Reply #67 on:** October 02, 2012, 09:57:53 PM »

Quote from: Bulldog67 on October 02, 2012, 09:15:20 PM

bad linky

thats cos you ain't on fb, or perhhaps you are tru te tuc?

Bulldog67 · « **Reply #68 on:** October 02, 2012, 10:07:29 PM »

I just had to open an account for work

willo · « **Reply #69 on:** October 02, 2012, 10:13:47 PM »

Quote from: Bulldog67 on October 02, 2012, 10:07:29 PM

I just had to open an account for work

education = Power.....

Cockney Boy · « **Reply #70 on:** October 02, 2012, 10:13:55 PM »

Link doesn't work and I've got a FB account

willo · « **Reply #71 on:** October 02, 2012, 10:16:02 PM »

Quote from: Cockney Boy on October 02, 2012, 10:13:55 PM

Link doesn't work and I've got a FB account

https://www.facebook.com/dave.lea.79

Bulldog67 · « **Reply #72 on:** October 02, 2012, 10:28:26 PM »

Quote from: Willo on October 02, 2012, 10:13:47 PM

Quote from: Bulldog67 on October 02, 2012, 10:07:29 PM
I just had to open an account for work

education = Power.....

Amen brother

Warthog · « **Reply #73 on:** October 02, 2012, 10:32:45 PM »

In all fairness, i think 3K for what he has got, irrespective of the axle ratios/61?? aint that bad. If you want a Project, that is?

Its a really well built truck. With issues that can be sorted for that money. Time and Money needed though..

Not sure why someone would want the np205 tc and engine though?

wildwood · « **Reply #74 on:** October 02, 2012, 11:08:12 PM »

Funny old world ain't it???

Author Topic: Big Red 1 Ton Jeep purchase!!! (Read 16028 times)

big_patrol

big_patrol

Cockney Boy

Cockney Boy