Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Can I ask (yet another) stupid question???  (Read 11049 times)

0 Members and 1 Guest are viewing this topic.

lefty

  • Guest
Can I ask (yet another) stupid question???
« on: February 24, 2006, 11:24:48 AM »
What are JKS dis-connects?

 :oops:
Logged

Mick O

  • Mickosaurus
  • Founder
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 2426
(No subject)
« Reply #1 on: February 24, 2006, 11:42:04 AM »
That would be these then.

http://http://www.jksmfg.com/quicker_disconnectsTJ_XJ_ZJ.htm


What they do?

Allow you to disconnect the anti roll bar on the front axel to allow greater travel of said axel when offroad.

Some would say they are the best, but there are other makes.

 8)
Logged
I'm not a complete idiot.......................some bits are missing


AKA Jurassic O




lefty

  • Guest
(No subject)
« Reply #2 on: February 24, 2006, 11:46:36 AM »
Ahhh, that's exactly hwat I was thinking (hoping) they were.

Must make a hell of a difference disconnecting the roll bar?

There's a relatively innocuous looking rut at Nor-trak that I can't get past becuase despite the 3" lift and 31" tyres, the diff grounds out.

Picture it:

Fairly steep uphill track with a 45 degree turn to the left about half way up (also sloping uphill). There's a hole about 6" lower then the rest of the rut on the apex of the corner, on the left hand side. Discos and defenders go straight through it but every time i've tried i seem to run out of articulation. Guy that runs the place just said I had to accept the xj probably wouldn't do it...
Logged

Anonymous

  • Guest
(No subject)
« Reply #3 on: February 24, 2006, 11:59:42 AM »
Bet it will with disco's....
Logged

Mick O

  • Mickosaurus
  • Founder
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 2426
(No subject)
« Reply #4 on: February 24, 2006, 11:59:51 AM »
I think you would have to ask one of the guys that offroad an XJ (KD, Chris Jones, Dr Mike) as to if its worth getting some. (I dont offroad my XJ now I have the CJ)

But I think that most would say that fitting them would be one of the first things to do.


 8)
Logged
I'm not a complete idiot.......................some bits are missing


AKA Jurassic O




chrisjones

  • Guru
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #5 on: February 24, 2006, 12:43:52 PM »
After some good tyres, it is THE upgrade to do.

I have JKS quicker discos. and wouldn't be without them.

They make a massive difference.  It's also worth removing the rear anti roll bar.  It don't do much anyway and the back end will flex better without it.

Disconnects:

Get some, stick them on, and show those landie owners just how wrong they were :wink:
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

lefty

  • Guest
(No subject)
« Reply #6 on: February 24, 2006, 12:45:40 PM »
Hmmm, sounds worthwhile. How easy is it to disconnect and reconnect the rear antiroll bar??
Logged

chrisjones

  • Guru
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #7 on: February 24, 2006, 12:50:03 PM »
No, you miss understood.

The procedure is:

1) Disconnect rear anti roll bar completely.

2) Chuck over nearest hedge.

:lol:
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

lefty

  • Guest
(No subject)
« Reply #8 on: February 24, 2006, 12:50:52 PM »
:D
Logged

lefty

  • Guest
(No subject)
« Reply #9 on: February 24, 2006, 12:54:11 PM »
Quote
Disconnects:

Get some, stick them on, and show those landie owners just how wrong they were


No offence to any landie owners on here but i've found that a lot of them really look down their noses at the xj. They conveniently ignored the fact that i pulled a stuck 130 out of a mudhole a few weeks ago...
Logged

Anonymous

  • Guest
(No subject)
« Reply #10 on: February 24, 2006, 01:49:13 PM »
agree with chris here, take rear antiroll bar off & throw over nearest hedge......tis only a bent paperclip anyway!!!

then get some disconnects on the front & you will be stunned the difference it makes!!

then get yourself a bumper sticker like mine to really piss the landie owners off!!! :twisted:
Logged

Anonymous

  • Guest
(No subject)
« Reply #11 on: February 24, 2006, 02:12:13 PM »
Why would lefty want a bumper sticker that says 'I wear silly shirts'? :lol:
Logged

UKJeeper

  • Guest
(No subject)
« Reply #12 on: February 24, 2006, 02:26:01 PM »
What are these "disconnects" and "anti-roll bar" things?? I've had a look under my YJ and i can't see any.  :?
Logged

Anonymous

  • Guest
(No subject)
« Reply #13 on: February 24, 2006, 02:38:28 PM »
Ah but you've got square headlights tho :roll:
Logged

chrisjones

  • Guru
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #14 on: February 24, 2006, 02:38:46 PM »
That'll be why you drag your door mirrors along the ground going round corners UK. :wink:
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

lefty

  • Guest
(No subject)
« Reply #15 on: February 24, 2006, 11:11:04 PM »
OK, disconnects are on the shopping list... might need some advice in fitting them though fellas!!!
Logged

IBTJn

  • Guest
(No subject)
« Reply #16 on: February 25, 2006, 12:49:13 AM »
Heck, just disco'ing the front axle makes a huge difference.  We are running the Rubicon GenII disco's on the wife's XJ.  She's running 31's and does just fine.  Her XJ only has a 2" OME kit on it though, but the rear sway bars are still hooked up.  Can you guys tell any road manner differences on pitch and roll with the rears removed?  If so, how much?

;)
Logged

chrisjones

  • Guru
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #17 on: February 25, 2006, 12:04:53 PM »
I've got a Skyjacker 3" lift on mine and the ride is much stiffer than stock.

With the rear AR bar fitted the back end felt a bit sketchy.  Once I'd junked it, the rear felt a lot more supple and (in my opinion) improved the on road ride. I still drive my truck quite hard on the road, there's lots of twisty lanes on my way to work and having the back end 'softer' than the front works well.

I don't know what others think though..........
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

Anonymous

  • Guest
(No subject)
« Reply #18 on: February 25, 2006, 12:56:44 PM »
Lefty, get your discos sorted first mate! I hated my XJ off road without the discos got stuck in every little mole hole, but when I put them on, shit what a differance :shock:
Really increases the capability of the truck! :D
Logged

lefty

  • Guest
(No subject)
« Reply #19 on: February 25, 2006, 03:16:19 PM »
I'll get em order asap  :lol:
Logged

JamesH

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
(No subject)
« Reply #20 on: February 28, 2006, 11:03:52 AM »
Get the JKS Disconnects.

Thinking about the track you describe though - because of the passenger side diff on an XJ and the landies having driver side diffs it may just be unfortunate that with the hole being on the left hand side, on the bend, that the XJ will bottom the diff and landies won't.

Hope that makes some sense. It may be fixed with disco's but if not it may just need to be driven differently to how the landies drive it.
Logged

lefty

  • Guest
(No subject)
« Reply #21 on: February 28, 2006, 11:46:51 AM »
Yeah, unfortunately due to steep (and deep) verges either side of the track there is no other way to drive it!!

Disconnects seem to be the way to go...  :D
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal