Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: heater controls  (Read 2832 times)

0 Members and 1 Guest are viewing this topic.

robsrotti

  • Guest
heater controls
« on: October 20, 2012, 12:57:41 PM »
Can anyone tell me why my heater control is only working on the 4th speed and not on the 1st, 2nd and 3rd. This has just happened on my XJ and on the wifes kj. Help please
Logged

YT

  • Guest
Re: heater controls
« Reply #1 on: October 20, 2012, 01:45:06 PM »
The resistor pack that controls the speeds has gone. You can order a new one from Magnim automotive in Maidstone. A r pack for a 96 is £47 later models are cheaper. :)
Logged

Jonny Jeep

  • Regular Member
  • Guru
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: heater controls
« Reply #2 on: October 20, 2012, 08:26:17 PM »
You can get them from £25 inc shipping from rockauto.com, to your door in a few working days via FedEx. They're in the heating section under blower motor control module/ resistor.
Logged

robsrotti

  • Guest
Re: heater controls
« Reply #3 on: October 21, 2012, 12:00:41 PM »
Quote from: Jonny Jeep on October 20, 2012, 08:26:17 PM
You can get them from £25 inc shipping from rockauto.com, to your door in a few working days via FedEx. They're in the heating section under blower motor control module/ resistor.
Thanks for the link,I'm well impressed with this company, they even had an actuator pin for the kj's ignition costing £18 rather than £800 over here as you have to buy the whole upper steering column. 2 resistors and the actuator pin plus vat and shipping cost £63 not bad.  :098:
Logged

Jonny Jeep

  • Regular Member
  • Guru
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: heater controls
« Reply #4 on: October 21, 2012, 08:10:47 PM »
I've had a quite a few things off them over the years. You'll get an email in several days with a 5% off code valid for a couple of months or so. Forgot to mention that as you can normally find a valid one floating about the net. If you click on one of the links in the actuator pin description they have a link to the video showing how to install it too.
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Guru
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: heater controls
« Reply #5 on: October 21, 2012, 08:14:36 PM »
HUBBA HUBBA....
Logged
"Not all those who wander are lost"

robsrotti

  • Guest
Re: heater controls
« Reply #6 on: October 28, 2012, 09:41:13 PM »
Done both the heater resistors today, if only every job was that easy. Its so nice to have all 4 speeds back
Logged

Cockney Boy

  • Guest
Re: heater controls
« Reply #7 on: October 28, 2012, 09:46:49 PM »
Quote from: robsrotti on October 28, 2012, 09:41:13 PM
Done both the heater resistors today, if only every job was that easy. Its so nice to have all 4 speeds back

 :steeringwheel: just on time for the cold snap
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal