Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: thumb button on gear shifter  (Read 1422 times)

0 Members and 1 Guest are viewing this topic.

jarekjeep

  • Guest
thumb button on gear shifter
« on: October 28, 2012, 08:39:15 PM »

does it do something. i cant see any difference when changing position PRND31-2 when press it or not? another broken bit or what?
Logged

Brynjaminjones

  • "Abe Lincoln"
  • Club Member
  • Guru
  • *
  • Guru: 8
  • Offline Offline
  • Posts: 2443
  • Vehicle: '98 XJ Cherokee 4.0 Limited, '97 ZJ Grand Cherokee 4.0 Limited, '91 Hunter Green SJ Grand Wagoneer 360
Re: thumb button on gear shifter
« Reply #1 on: October 28, 2012, 09:25:19 PM »

I think it's supposed to stop you from changing into drive or reverse from neutral or park, or something along those lines. Sounds like it's probably broken, although I'm sure someone who knows more will be along to help :003:
Logged

jarekjeep

  • Guest
Re: thumb button on gear shifter
« Reply #2 on: October 28, 2012, 09:34:52 PM »

will wait then. thank you for your reply. it doesnt work anyway. big deal to repair it?
Logged

big g

  • Guest
Re: thumb button on gear shifter
« Reply #3 on: October 28, 2012, 09:41:53 PM »

Shouldn't come out of park unless it's depressed.
Logged

jarekjeep

  • Guest
Re: thumb button on gear shifter
« Reply #4 on: October 28, 2012, 09:51:06 PM »

it doesnt know about it and it does.
Logged

Lukemagnum

  • Guest
Re: thumb button on gear shifter
« Reply #5 on: October 28, 2012, 09:57:26 PM »

It should stop you from accidentally knocking the selector forward into Reverse or Park From Drive without a deliberate action. Handy for when you stick the brakes on and the Missus has used your centre armrest as a handbag stand.

The ones I've pulled apart,  have a spring loaded plastic rod which locates into a slotted track. Either the end of the rod has broken or the spring has failed.
Logged

jarekjeep

  • Guest
Re: thumb button on gear shifter
« Reply #6 on: October 28, 2012, 10:00:58 PM »

thank you. is it difficult to do? im not too technical
Logged

Lukemagnum

  • Guest
Re: thumb button on gear shifter
« Reply #7 on: October 29, 2012, 12:15:18 PM »

Don’t know, I’ve never done one on a Jeep but if you’re not confident about pulling things apart and sussing out how they work then you’re best leaving it to someone who is.

If you do have a go and assuming you can get the parts a word of warning:

Do it on level ground with the wheels chocked - to get the centre console out you normally need to have the selector in the middle out of park and you’re messing about around the handbrake lever (need I say more?).

If you need to disconnect any mechanical cables on the selector, leave it alone, these go to the autobox and have to be in a set position.

Good Luck
Logged
Pages: [1]   Go Up
 

Powered by EzPortal