Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: TJ seat wiring  (Read 2337 times)

0 Members and 1 Guest are viewing this topic.

philthy

  • Guest
TJ seat wiring
« on: January 13, 2013, 10:13:20 AM »
HI

I have aquired a nice WJ interior and have fitted the front two leather seats onto my TJ rails, anyway they slide back and fore fine just wondered if anyone else had done this and have wired up the recline/lumber facilty.

Im guessing running a fused wire straight from battery to seat would work?

any thoughts folk?

thanks in advance - Phil
Logged

philthy

  • Guest
Re: TJ seat wiring
« Reply #1 on: January 15, 2013, 11:44:12 AM »
nobody done this?
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Guru
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: TJ seat wiring
« Reply #2 on: January 15, 2013, 06:55:44 PM »
Well one has to ask WHY!! Doesn't at first glance appear to be a good idea, whats your logic for this?
Logged
"Not all those who wander are lost"

philthy

  • Guest
Re: TJ seat wiring
« Reply #3 on: January 15, 2013, 07:00:09 PM »
my seats are knacked and got these free! im a jock!
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Guru
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
Re: TJ seat wiring
« Reply #4 on: January 15, 2013, 07:11:16 PM »
Ahhhhh!! Tight Minge Technology, can't help but wish you the very best of luck on this project.
Logged
"Not all those who wander are lost"

Jonny Jeep

  • Regular Member
  • Guru
  • *
  • Guru: 11
  • Offline Offline
  • Posts: 1372
  • Vehicle: TJ 4.0 Sport
  • Year: 1997
Re: TJ seat wiring
« Reply #5 on: January 15, 2013, 08:47:09 PM »
Looks like theres two types of leccy seat. Simpler one has 12V (20A fuse) and earth to the seat switch to power seat position motors, the other has a seat control module and looks a bit more complicated as it also ties in to the door module for seat memory positions. Lumbar switches share the same 12V as the seat motors. No reason they can't be wired in.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal