Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mrtibbs]

Hi All
I have a 2005 (55) Jeep Grand Cherokee, 3.0 CRD and a couple of times recently after driving for about an hour I have arrived at home and reversed onto the drive. As I select reverse it just sits there doing nothing for a few seconds, then it will go into reverse and work fine. I can then select forward or reverse and it all works properly.
Has anyone got any ideas as to what is going on and able to offer and advice?
TIA

Keith

[bigjeepzj]

check the fluid level.
i could be a sticky solenoid on you valve body or the switch in the selector leaver.

[jay140285]

How many miles on it?


Sent from my iPhone using Tapatalk

[mrtibbs]

I will have the fluid checked, although I am certain that the last time it was serviced, I asked them to do it...
It has 92000 miles on the clock.
Thanks

Keith

[jay140285]

Has it had the flash update done on the transmission? Ours has had it done and it perfectly smooth.

http://www.wkjeeps.com/wk_tsb.htm#TRANSMISSION

[mrtibbs]

Has it had the flash update done on the transmission? Ours has had it done and it perfectly smooth.

http://www.wkjeeps.com/wk_tsb.htm#TRANSMISSION

Hi, not as far as I know... How can I check if it has had it?

Keith

[jay140285]

If it's not in the paper work you have with the jeep, give a dealer a call and they will want VIN number and will do a check.


Sent from my iPhone using Tapatalk

[mrtibbs]

Thanks for that, will call tomorrow if I get time

Keith