May 11, 2025, 04:50:50 AM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
CJ 2" LIFT SHACKLES
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: CJ 2" LIFT SHACKLES (Read 7436 times)
0 Members and 1 Guest are viewing this topic.
Tank
Guest
CJ 2" LIFT SHACKLES
«
on:
April 28, 2006, 09:20:58 PM »
Advice needed..........have just fitted some 2"lift shackles to my CJ.They were originally Suzuki heavy duty ones i bought new off the bay.They fitted the front with no modification.The back springs on the CJ are wider than Suzi ones so i drilled out connecting bars and used bolts to enable them to fit the wider spring and bracket.Seems to have worked a treat but having fitted them,is there anything i need to do to steering or anything similar,or am i okay seeing as its only a 2 inch lift????Thanks in advance for any info/advice
Logged
Bubba
"Cooter"
Marshal
Guru
Guru: 69
Offline
Posts: 21029
(No subject)
«
Reply #1 on:
April 29, 2006, 01:22:44 AM »
just check your distances tyres to chasis by turning and measuring the gap turn it to full lock to the left and then to the right you now may but i dont think so have a smidge more lock on one side if so on the drag link from the steering box you will see to half inch 13mm bolts un do them and then lengthen the drag link by twisting the tube joint un till it is the same gap lock to lock
Logged
trucks
shedric
cletus
mr whippy
I spent most of my money on alcohol, women and old iron........ the rest of it I just wasted.
Tank
Guest
(No subject)
«
Reply #2 on:
April 29, 2006, 06:57:22 AM »
Thanks Bubba,will have a look later and see
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
CJ 2" LIFT SHACKLES
Powered by
EzPortal
Go Up
Go Down