Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: 4.0 wj big ends  (Read 2476 times)

0 Members and 1 Guest are viewing this topic.

supersparks

  • Guest
4.0 wj big ends
« on: February 16, 2015, 08:10:46 PM »
Hi all, my 2002 GC has had a slight tap for about 30,000 miles but now the slight tap has turned  into a very distinct big end knock, my question is if anyone has had any experience of big end bearing failure on these engines am I potentially looking at the rods going oval .And if so does anyone have a complete rod lying around.
Logged

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
Re: 4.0 wj big ends
« Reply #1 on: February 16, 2015, 09:33:45 PM »
if your anticipating oval shaped rods be prepared for wear on the crank as well
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

scrw

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 749
  • Vehicle: jeep
  • BD, Fred Kite reincarnated
Re: 4.0 wj big ends
« Reply #2 on: February 16, 2015, 09:38:52 PM »
Worth fixing or just swap out the engine?
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal