Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: New headers, not removed the old one in 16 years....  (Read 5296 times)

0 Members and 1 Guest are viewing this topic.

scrw

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 749
  • Vehicle: jeep
  • BD, Fred Kite reincarnated
New headers, not removed the old one in 16 years....
« on: March 26, 2015, 07:34:25 PM »
How lucky do I feel? Stock headers have been there since built in 99, I am going with new bolts, but how many will break?  :lol_hitting:
Logged

Yakko

  • Guest
Re: New headers, not removed the old one in 16 years....
« Reply #1 on: March 26, 2015, 08:19:44 PM »
It'll be shit, no doubt.

When I did my '98 TJ, I covered the manifold bolts in penetrating oil for 3 or 4 nights before I did the job.

Didn't break any bolts.

Access is really shit, especially to the ones underneath, which you can barely see. There's not enough room to get a breaker bar to them, so I found I was best off locking two spanners together and doing it that way.

Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Guru
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: New headers, not removed the old one in 16 years....
« Reply #2 on: March 26, 2015, 08:34:05 PM »
91 YJ...... Just put lots of penetrating fluid the day before......then windy gun and off they came.

Best of luck.... :icon_super:
Logged

Yakko

  • Guest
Re: New headers, not removed the old one in 16 years....
« Reply #3 on: March 26, 2015, 08:36:41 PM »
How'd you get a windy gun to the ones underneath?
Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Guru
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
Re: New headers, not removed the old one in 16 years....
« Reply #4 on: March 26, 2015, 08:58:56 PM »
Cheated....l.took the front wing off :icon_biggrin:
Logged

xr6jeeper

  • Guest
Re: New headers, not removed the old one in 16 years....
« Reply #5 on: March 26, 2015, 09:28:26 PM »
If you run the engine first they will be hot and should come out easier :icon_winkle:
Logged

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
Re: New headers, not removed the old one in 16 years....
« Reply #6 on: March 26, 2015, 10:47:00 PM »
 :iagree:
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

scrw

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 749
  • Vehicle: jeep
  • BD, Fred Kite reincarnated
Re: New headers, not removed the old one in 16 years....
« Reply #7 on: March 26, 2015, 11:01:30 PM »
Done a couple of xj's before, they were easy enough, wj's must have more room  :lol_hitting:
Will order my bits from lightys tomorrow & soak the bolts over the weekend
Logged

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
Re: New headers, not removed the old one in 16 years....
« Reply #8 on: March 26, 2015, 11:21:06 PM »
none.
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

Brynjaminjones

  • "Abe Lincoln"
  • Club Member
  • Guru
  • *
  • Guru: 8
  • Offline Offline
  • Posts: 2444
  • Vehicle: '98 XJ Cherokee 4.0 Limited, '97 ZJ Grand Cherokee 4.0 Limited, '91 Hunter Green SJ Grand Wagoneer 360
Re: New headers, not removed the old one in 16 years....
« Reply #9 on: March 27, 2015, 02:13:33 PM »
My originals came out of the XJ fine last year with no prep.  8-)
Logged

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: New headers, not removed the old one in 16 years....
« Reply #10 on: March 28, 2015, 08:58:32 PM »
they will be fine
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal