Topic: 1973 CJ6, powertrax lockright locker in the front axle... (Read 7701 times)

fha772 · « **on:** April 17, 2015, 10:41:54 AM »

Hi all,

I've got to swap the gears in my new dana 30 front axle, so I was thinking of fitting a locker/lsd while I'm at it.

I'm thinking of fitting a Powertrax Lockright, has anyone else fitted one in their front axle?

I'm planning to fitting freewheeling hubs too, to make it more civilised on the road.

This is the locker I'm looking at;
http://www.jimnybits.co.uk/shop/other-4x4-models/jeep/cherokee-xj/dana-30-powertrax-lockright-differential-locker/prod_583.html

Are they ok?

Cheers Frank.

Bulldog67 · « **Reply #1 on:** April 17, 2015, 11:02:32 AM »

dont know but we had a thread here recently where some recommendations were made:

http://www.birtydastards.com/frm/index.php?topic=27263.msg317482#msg317482

wildwood · « **Reply #2 on:** April 17, 2015, 01:06:02 PM »

Yes they are great had one in the front of my Dana 30 (YJ) for years.....fine with FWH ...great off road.

dieselj20 · « **Reply #3 on:** April 17, 2015, 08:21:51 PM »

run one in my cj3a since 1993 no problem

IrishCJ6 · « **Reply #4 on:** April 17, 2015, 08:50:44 PM »

I have a mechanical lsd in my d30 on the 6, great and predictable

fha772 · « **Reply #5 on:** April 17, 2015, 08:59:13 PM »

Thanks, I'll get one bought then!!

Yakko · « **Reply #6 on:** April 17, 2015, 10:15:22 PM »

I have a Lokka / Aussie Locker in the front of my TJ, probably the best thing I've done to it.