Topic: 1998 grand Cherokee Steering Stabiliser (Read 2704 times)

delboy259 · « **on:** April 19, 2015, 04:31:45 PM »

Ok......
The steering damper Has passed It's sell By Date.
I have Got a New One to Replace It.
But.......
I can't Get The Old One Off......
I Have Found Out that I Need A Pitman Arm Puller To Remove The Bolt From the Drag Arm.
That's Fine, But I Don't Know What Size I Need...
I See That There Is A 27mm Or A 33mm
Can Any Of You Learned Guys Point Me In the Right Direction?
Thanks

Derek

Mike Pavelin · « **Reply #1 on:** April 19, 2015, 08:30:33 PM »

Rip the damper off the stud and then twist the stud out with a deep socket on a breaker bar if it has a hex on it or a big pair of stilsons if it hasn't.

delboy259 · « **Reply #2 on:** April 20, 2015, 01:32:05 PM »

Thanks Mike.
That will be the next thing I will try.
I have got an outing planned for Sunday so I will leave it till after then.
Tried everything else but the little bugger wont shift

Author Topic: 1998 grand Cherokee Steering Stabiliser (Read 2704 times)

delboy259

1998 grand Cherokee Steering Stabiliser

Mike Pavelin

Re: 1998 grand Cherokee Steering Stabiliser

delboy259

Re: 1998 grand Cherokee Steering Stabiliser