Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: HT Leads For 1997 Grand Cherokee 4.0lt  (Read 2169 times)

0 Members and 1 Guest are viewing this topic.

delboy259

  • Guest
HT Leads For 1997 Grand Cherokee 4.0lt
« on: June 14, 2015, 04:21:41 PM »

Ok folks.
My Jeep is ready for a new set of HT leads.
Can any of you learned folk point me in the right direction for a quality set please?

I don't mind paying for quality parts but I do mind paying over the odds.....

I have seen a set of Prospark leads that seem reasonable....

Are these any good or do I need to keep looking.

Thanks

Derek
Logged

Brachunky

  • Guru
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 269
  • Vehicle: Wrangler TJ 4I6
  • Year: 1997
  • Brachunky
Re: HT Leads For 1997 Grand Cherokee 4.0lt
« Reply #1 on: June 14, 2015, 06:59:03 PM »

I have used Bougicord over the years and can recommend them.Good quality and certainly not your Halfrauds crap :icon_winkle:
http://www.ebay.co.uk/itm/Jeep-Cherokee-Grand-Cherokee-Wrangler-4-0-7111-Bougicord-OE-Quality-HT-lead-set-/181639387689?pt=LH_DefaultDomain_3&fits=Car+Make%3AJeep&hash=item2a4a8d1a29
There may of course be better!
Logged

LairdScooby

  • Guest
Re: HT Leads For 1997 Grand Cherokee 4.0lt
« Reply #2 on: June 14, 2015, 07:46:12 PM »

You could also make your own from Ferroflex 8mm cable in any colour you like as long as it's red, black or blue :

http://www.ebay.co.uk/itm/121056208202?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I can point you in the direction of a supplier of the terminals etc for the ends as well and a guide to making them if that helps.

As for Prospark, i had a set of them on my 827 Sterling once. Then i made some out of Ferroflex and so far, they've lasted longer.  :icon_biggrin:
Logged

delboy259

  • Guest
Re: HT Leads For 1997 Grand Cherokee 4.0lt
« Reply #3 on: June 15, 2015, 09:30:50 AM »

Thanks for the Replies Folks.

The HT leads on my jeep look like the original red ones and feel like they are starting to break down.
I have gone for the Bougicord leads as I don't fancy making my own.

Hope they last as long as the OEM ones... Best part of 100k

Derek
Logged

LairdScooby

  • Guest
Re: HT Leads For 1997 Grand Cherokee 4.0lt
« Reply #4 on: June 15, 2015, 10:08:20 AM »

Bougicord are good kit Derek so you should be fine. Making your own leads isn't for everyone, i did it because i didn't fancy paying £200+++ for a set from Honda for my Rover 827 (same as a Honda Legend) and the £33 Prospark ones didn't last a dogwatch on it. That said the Honda C27/Rover 2.7 engine is renowned for being "hard" on HT leads.
When i get round to doing the leads on my Jeep i'll do a write up with pictures which will hopefully help others out.
Logged
Pages: [1]   Go Up
 

Powered by EzPortal