Topic: Breakout 2016 (Read 76352 times)

Tonyslep · « **Reply #100 on:** April 29, 2016, 09:54:45 PM »

Gutted, can't make it due to work

Sent from my iPhone using Tapatalk

jay140285 · « **Reply #101 on:** April 30, 2016, 07:36:13 PM »

I'm trying to keep the diary free!

www.facebook.com/jrservicingandtransport

www.jrservicingandtransport.co.uk

Bubba · « **Reply #102 on:** May 01, 2016, 07:52:23 AM »

you might be able to tow someone home if you take your trailer

JamesH · « **Reply #103 on:** May 07, 2016, 09:16:50 AM »

I might be giving oh some business

fingers crossed its not needed.

carlos · « **Reply #104 on:** May 07, 2016, 08:18:38 PM »

Hi Gaz. I'm new here and looking to attend this event.

I can only make the Saturday. could you pm me the PayPal address and a cost please mate and I will get the money sent over.

Cheers

Ezz · « **Reply #105 on:** May 07, 2016, 08:22:04 PM »

Hi Carlos, post a picture here of your Z8,
It's not a jeep but it's not a Landrover either.

carlos · « **Reply #106 on:** May 07, 2016, 08:23:02 PM »

I will try ezz

I'm on my phone

carlos · « **Reply #107 on:** May 07, 2016, 08:42:37 PM »

https://drive.google.com/file/d/0B6IXnqI0BVgqbklrN2tfWjBsZEM4LWxDOGZITDB4eDRIRE9N/view?usp=drivesdk

Best I can do is a link. But there she is

Ezz · « **Reply #108 on:** May 07, 2016, 08:57:25 PM »

Pocket rocket, Jez will like it..

wildwood · « **Reply #109 on:** May 07, 2016, 09:03:03 PM »

Oooohhhhhh.

An RZR......lol

Did I,ever mention that I had a day racing these in Wales a few years back?

I did?? Oops.

gazjeep · « **Reply #110 on:** May 07, 2016, 11:30:27 PM »

Quote from: carlos on May 07, 2016, 08:18:38 PM

Hi Gaz. I'm new here and looking to attend this event.

I can only make the Saturday. could you pm me the PayPal address and a cost please mate and I will get the money sent over.

Cheers

Good to see you made it, PM sent mate

gazjeep · « **Reply #111 on:** May 08, 2016, 11:59:43 AM »

Carlos,

Cash received mate thanks, your on the list

carlos · « **Reply #112 on:** May 08, 2016, 01:15:33 PM »

Super. See you Saturday

Ezz · « **Reply #113 on:** May 08, 2016, 08:43:52 PM »

Are we all ready then (apart from the general)

I've run out of time to finish my bead locks, they only need paint and the dreaded air tightness test, got a full weeks work ahead of me, so a bit risky to start taking tyres off wheels,
I'm also stuck in 4low but this isn't a problem, it's been like it for the last 12 months, got the Novak shifter to fit but not sure I'll get it done,

JamesH · « **Reply #114 on:** May 08, 2016, 10:20:02 PM »

Err, not exactly

New windscreen being fitted Tuesday, MOT Wednesday and got to sort new stop / tail lights first because one of the LED ones has taken a crap. If I have time after that I might get a chance to fit a winch and test drive it properly. Everything is crossed, I have no spare time if something big needs doing but I have put a lot of hours in getting it this far so hopefully...

Ezz · « **Reply #115 on:** May 09, 2016, 05:52:08 AM »

Fingers crossed for you pal, I'm looking forward to seeing it....

Bubba · « **Reply #116 on:** May 09, 2016, 07:31:14 AM »

cleaned mine is as far as i have got need to track down committee trailer and load moose with camping gear and fit a rear seat

donk498 · « **Reply #117 on:** May 09, 2016, 08:47:23 PM »

Well I'm ready I think. OK I have cheated slightly by buying a new jeep

Ran out of time to get props made for the Xj, ones I've welded up work but very out of balance so brought the tj off Charlie. Will give me time to sort the Xj properly.
Looking forward to driving something different

Ezz · « **Reply #118 on:** May 09, 2016, 08:54:11 PM »

Donk in a Tj
That'll take some getting used to..

5536paulj · « **Reply #119 on:** May 09, 2016, 09:04:55 PM »

State of play as of this evening

Both props seized and joints mullered, took them to local prop guy
Wheel bearings destroyed by mud...
Not sure how to make the steering work with the bigger diff...

Good news, 44 is in , extended shock mounts and shocks in

Still a bit of work to do, probably be down Saturday morning if i get it all worked out

donk498 · « **Reply #120 on:** May 09, 2016, 09:36:19 PM »

Quote from: Ezz on May 09, 2016, 08:54:11 PM

Donk in a Tj
That'll take some getting used to..

I know, it feels very short and unstable....

So every one is cutting it close with getting jeeps ready then.

suppersready · « **Reply #121 on:** May 09, 2016, 10:57:50 PM »

Pretty much done ...... but I wont be able to disconnect the front end as the track bar and its axle end mounting bracket are bent enough to mean that at anywhere near full flex it binds with the steering links, so I guess I may not be doing much to seriouse or I'll be ringing the local recovery peeps.
I've sourced a new bar and when converted to an adjustable I will need to book in with Bubba for a fix ...

gazjeep · « **Reply #122 on:** May 10, 2016, 08:07:15 AM »

Zac, you are on the list

Zacwoosnam · « **Reply #123 on:** May 10, 2016, 08:04:58 PM »

Woo thanks gaz, can't wait. Almost ready, just hoping my high lift hood mounts come in time

Brynjaminjones · « **Reply #124 on:** May 10, 2016, 08:42:48 PM »

Emily and I will be coming down for both days, not sure when arriving yet though. We'll only be having a gentle bimble around in my XJ, as it needs to be kept working for daily driver duties!

I can't remember payment details, but will have a scout around for them this evening!

Author Topic: Breakout 2016 (Read 76352 times)

jay140285

carlos

carlos

carlos

carlos

donk498

5536paulj

donk498

suppersready

Zacwoosnam