Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Zj gearbox crossmember clearance modification  (Read 12829 times)

0 Members and 1 Guest are viewing this topic.

robbieg

  • Guest
Zj gearbox crossmember clearance modification
« on: April 10, 2016, 11:17:58 PM »
Hi is there a way of modifying my gearbox crossmember to give me more clearance I went off roading today and I got stuck on the mount also last time I got stuck was because of the mount can I just cut it so it's a single plate instead of box or I also thought of a large piece of plate say 1/4 inch thick I wanna keep the rubber mount thanks in advance Rob
Logged

bigjeepzj

  • Club Member
  • Guru
  • *
  • Guru: 22
  • Offline Offline
  • Posts: 3438
  • lift it, brake it, Fix it brake it, fix it again
Re: Zj gearbox crossmember clearance modification
« Reply #1 on: April 11, 2016, 09:06:21 PM »
here's a pic of a Rubicon express one  but what lift have you got






Logged

robbieg

  • Guest
Re: Zj gearbox crossmember clearance modification
« Reply #2 on: April 11, 2016, 09:28:54 PM »
Hi I don't at the minute but I'm getting a 3" lift off eBay that comes with a transfer case drop
Logged

The Smiths

  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 1084
Re: Zj gearbox crossmember clearance modification
« Reply #3 on: April 11, 2016, 10:37:54 PM »
on my XJ I have had to beef up the crossmember because of bending it - it now has a 10mm fillet on the front and 8mm underneath it

Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund: http://www.justgiving.com/The-Smiths-2015
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal