Topic: Blowby. (Read 3527 times)

UKJeeper · « **on:** August 13, 2016, 01:47:35 PM »

Getting 'blowby' from the valve cover to the airfilter, and a delicate 'eau de oile' when cruising down the road. Checked the ccv valve and cleaned out out, had the cover off and cleaned the baffles (no sludge there anyway). Plenty of vacuum from the intake manifold, but a lot less at the front connector. How much suck should I expect at the front (to the airbox) connector?

5536paulj · « **Reply #1 on:** August 13, 2016, 02:14:07 PM »

I had that for years, pool of oil collecting in the air cleaner, pcv valve seemed fine, was clean and rattled like it should.

Fitted a new pcv valve and grommet and it went away forever, get a new one, rule it out properly first before digging deeper.

Dave69 · « **Reply #2 on:** August 16, 2016, 08:58:10 PM »

PCV grommet at the front cracks and doesn't seal. the rear is just as bad

Author Topic: Blowby. (Read 3527 times)

UKJeeper

Blowby.

5536paulj

Re: Blowby.

Dave69

Re: Blowby.