Topic: XJ rocker panels/door sills. (Read 7826 times)

UKJeeper · « **on:** July 31, 2006, 07:16:20 PM »

Washing the XJ and my finger pushed through the rocker panel/door sill. Made me wonder what you have done to fix/upgrade the door sills on XJ's?

chrisjones · « **Reply #1 on:** July 31, 2006, 07:21:20 PM »

Nowt meself, but I do know from the NAXJA forum that some folks over there replace them with box section. Sounds like a reasonable idea to me if the sills are shot. No need for sliders if you've got box section sills.

ponyracer1 · « **Reply #2 on:** July 31, 2006, 07:38:10 PM »

X2

Don't even bother with the sheet metal repair and making it look pretty. Search on NAXJA for rockers and there will be TONS of posts on it.

Quote from: "chrisjones"

Nowt meself, but I do know from the NAXJA forum that some folks over there replace them with box section. Sounds like a reasonable idea to me if the sills are shot. No need for sliders if you've got box section sills.

Mike Pavelin · « **Reply #3 on:** July 31, 2006, 10:12:14 PM »

Oh for f**ks sake.

You're never gonna 'wheel it.

Weld a patch on it or you'll make a whole load of work for yourself you don't need.

lefty · « **Reply #4 on:** August 01, 2006, 06:52:48 PM »

I've often thought about welding some angle-plate to the chassis rails (with some connecting pieces) that will just cover the sills with maybe 10mm clearance. anyone tried this?

MK1 · « **Reply #5 on:** August 01, 2006, 06:58:10 PM »

Quote from: "Mike Pavelin"

Weld a patch on it or you'll make a whole load of work for yourself you don't need.

As someone who has had one delay after another I agree with the Dr.

Author Topic: XJ rocker panels/door sills. (Read 7826 times)

UKJeeper

XJ rocker panels/door sills.

chrisjones

(No subject)

ponyracer1

(No subject)

Mike Pavelin

(No subject)

lefty

(No subject)

MK1

(No subject)