Topic: vacuum unit on xj (Read 5214 times)

Dave69 · « **on:** December 04, 2006, 09:05:34 PM »

does the vacuum unit have any moving parts inside i.e a sliding baffle or blanking plate ?

on start up i have a noise that sounds like a baffle being moved under pressure then it releases. lasts for a few seconds then goes quiet. it can be affected buy altering the heater direction setting. would it/can it be servicable ?

Mr.Stu · « **Reply #1 on:** December 04, 2006, 09:48:48 PM »

The doors in your heater box default to demist when there is no vacuum applied. Is this happening every time you start up or just if it has been sitting for a while? You may have a bit of a vacuum leak but not a total failure. Check that the vacuum reservoir does not have a crack in it and that the pipwork is all secure.

Stu.

Dave69 · « **Reply #2 on:** December 05, 2006, 07:42:58 AM »

sounds like something like that is happening nearly everytime it starts. sounds like a suction build up then release.
don't want to sound daft but what does it look like and i believe it's near the front bumper somewhere

tim_aka_tim · « **Reply #3 on:** December 05, 2006, 08:06:35 AM »

Dave69 · « **Reply #4 on:** December 05, 2006, 08:32:24 AM »

thanks

you just cant beat a picture to show a location

Mr.Stu · « **Reply #5 on:** December 05, 2006, 11:24:44 AM »

If you have a '97 or newer XJ it is on the other side and is round not oval.

Stu.

Mike Pavelin · « **Reply #6 on:** December 05, 2006, 04:22:06 PM »

That looks like a left hand drive, I think all RHD are on the other side.

Dave69 · « **Reply #7 on:** December 05, 2006, 04:55:58 PM »

'93 year but at least i know now what i'm looking for/at

Author Topic: vacuum unit on xj (Read 5214 times)

Dave69

vacuum unit on xj

Mr.Stu

(No subject)

Dave69

(No subject)

tim_aka_tim

(No subject)

Dave69

(No subject)

Mr.Stu

(No subject)

Mike Pavelin

(No subject)

Dave69

(No subject)