Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: sump gasket  (Read 6883 times)

0 Members and 1 Guest are viewing this topic.

cherokeegraham

  • Guest
sump gasket
« on: January 30, 2007, 06:54:46 PM »
I'm trying to remove the sump to change the gasket which is leaking, how the hell do you get the bloody thing off? It's loose, I've droped the axle down as far as I can but it won't wangle out. I've removed the old gasket with the sump where it is, is it possible to fit the new one as is, will it matter if it gets oily while I'm trying to get it under the oil pump? Has anyone done it? Help!
Logged

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #1 on: January 30, 2007, 08:38:05 PM »
the gasket ideally should be dry and the two faces it mates to should be dry as well
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal