May 15, 2025, 12:15:06 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Forum
Help
Login
Register
GALLERY
Unread
Events
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Cherokee lift.
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: Cherokee lift. (Read 7646 times)
0 Members and 1 Guest are viewing this topic.
cherokeegraham
Guest
Cherokee lift.
«
on:
February 16, 2007, 07:07:00 PM »
I have a Rocky Road 2" budget lift, but I got stuck while out laning at the weekend when I grounded the TC crossmember. My question is, can I add more spring spacers & a bigger axle block to get more lift without affecting the rest of the drivetrain? How high can I go? I don't have any money to spend, so I was planning on making my own spacers & blocks.
Logged
chrisjones
Guru
Guru: 4
Offline
Posts: 5841
Vehicle: Dogface
Sometimes I wonder....
(No subject)
«
Reply #1 on:
February 16, 2007, 09:34:38 PM »
Apart from the fact that you'll have no more articulation if you fit pucks and blocks........
If you go higher than 2" with the setup you've got, your front caster angle is going to be too small and you'll start to get bump steer problems and loosing the self centring on the steering. You really need replacement lower control arms over 3".
At the back, with the spring over setup on the XJ taller blocks will start to induce axle wrap because of the greater leverage too.
Sorry to be the bearer of bad news, but 2" really is the limit for the setup you have. You need a full spring lift with replacement arms and possibly a t case lowering kit to go any higher.
Logged
God was my copilot but we crashed in the mountains and I had to eat him.
JamesH
Club Member
Guru
Guru: 1
Offline
Posts: 4998
Vehicle: JK
Year: 2010
(No subject)
«
Reply #2 on:
February 16, 2007, 10:25:37 PM »
I'd agree with above. You might end up spending as much fixing problems that more spacers cause as you would on a cheaper lift kit.
Have a look at Pro-comp, Rusty's Offroad and Rough Country lift kits on the web. With the exchange rate you could get a very good deal and have replaced your entire suspension with new components.
Logged
Bubba
"Cooter"
Marshal
Guru
Guru: 69
Offline
Posts: 21029
(No subject)
«
Reply #3 on:
February 17, 2007, 10:05:55 AM »
yup i agree mixing and stacking bits just aint gonna work out longterm much better to get a full kit for the hight you want and try and sell your old bits as there will be somone who only wants to go up two inches who will buy it
there are mixed lift jeeps about and i rekon they may actualy be dangerous with out there owners knowing it
Logged
trucks
shedric
cletus
mr whippy
I spent most of my money on alcohol, women and old iron........ the rest of it I just wasted.
Dave69
Club Member
Guru
Guru: 15
Offline
Posts: 9457
Vehicle: CJ-7 4.2 auto
Year: 1979
(No subject)
«
Reply #4 on:
February 17, 2007, 05:42:15 PM »
the exchange rate may be good but just watch the shipping costs especially uk shipping companies
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm
jonathanhann
Guest
(No subject)
«
Reply #5 on:
February 19, 2007, 07:17:34 PM »
yes there will be soeone who would buy the 2" kit for the right price, if you sell let me know, Cheers
JON
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Birty Dastards Jeep Club
>
Forum
>
Tech Forum
>
Workshop
>
Topic:
Cherokee lift.
Powered by
EzPortal
Go Up
Go Down