Topic: If (Read 7755 times)

djgg · « **on:** April 16, 2007, 09:04:08 PM »

My M38A1 has a sick engine / gear box , so i was thinking what IF i removed the engine/gear box and put in a second hand engine/gear box
from a modern car . Does anyone know what engine /gear box would fit
with with no major work ?

Any help would be great

David

daggie · « **Reply #1 on:** April 17, 2007, 06:37:08 PM »

no major work, mmmmmmmmmmm :rotflmao:

lectrickery would be the hardestish bit, me finks

DarrenR · « **Reply #2 on:** April 17, 2007, 07:06:10 PM »

try measuring up a ford pinto as in early escorts from the 70's
They are compact and not high tech.
A series mini engine.
Can't see anything going in without rewelding mounts.

Darren.

Dave69 · « **Reply #3 on:** April 17, 2007, 08:26:37 PM »

it's not just a case of slinging in any old car engine. as each engine has a different way of installation. modern cars have ecu and other electrical stuff which can get complicated. look at a simple non ecu and carb engine so when it breaks it can be a relatively cheaper fix. you will have to make your own/adapt engine mounts and gearbox mounts if any. you will have to aline the transmission as well so not a simple job unless your swapping for another engine exactly the same

greggmo · « **Reply #4 on:** April 17, 2007, 11:05:06 PM »

an early 4 popper cj runnin gear might fit. bubba will know.

djgg · « **Reply #5 on:** April 18, 2007, 08:29:19 PM »

Thanks for your replys .
It has answered my question , I rembered a Jeep on ebay not so long ago with a french made engine in it so i was thinking if he has done it
so why cant I , but you have comfirmed it , isnt worth thinking of .
So it must be like for like , does anyone have a good engine/gearbox for a M38A1 that they dont need ?

Again thanks for your help

David

Dave69 · « **Reply #6 on:** April 18, 2007, 09:12:18 PM »

i think it was a peugeot diesel engine

Mike Pavelin · « **Reply #7 on:** April 18, 2007, 09:36:09 PM »

Get the original rebuilt.

Bubba · « **Reply #8 on:** April 19, 2007, 09:21:01 PM »

have to agree whith mr p rebuild the original as its an m38a1 however ther used to be a pinto conversion for your gear box also there was one to fit the 215 cubic inch buick engine [aka rover v8 ] advance adapters still may do the buick plate but you would need to do some research to find the pinto plate may i ask why you are considering a swopped engine over an original do you show or offroad?

djgg · « **Reply #9 on:** April 21, 2007, 08:49:06 PM »

I was trying to find a way to get the Jeep fixed .
When its fixed i will use it for shows and off road, if possible every day .
The engine is starting to sound like a bucket of bolts and leeks lots of oil ,
gear box just leeks lots and lots of oil .

I would love to be able to rebuild the engine/gear box BUT i know
F*** all about fixing engines .

Does anyone know anyone who would be able to rebuild a M38A1 engine?

Author Topic: If (Read 7755 times)

djgg

If

daggie

(No subject)

DarrenR

(No subject)

Dave69

(No subject)

greggmo

(No subject)

djgg

(No subject)

Dave69

(No subject)

Mike Pavelin

(No subject)

Bubba

(No subject)

djgg

(No subject)