Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: steering stops  (Read 5265 times)

0 Members and 1 Guest are viewing this topic.

tag

  • Guest
steering stops
« on: April 21, 2007, 08:42:35 PM »
Hi,
since fitting new tyres 31s  ive had a little rubbing on full lock, so spaced the steering stops as link , sorted.    :D  http://jeepgarage.free.fr/pneus.html
Logged

Sam

  • Guest
(No subject)
« Reply #1 on: April 21, 2007, 09:56:30 PM »
cooooooool i'll have to do that, i get a little bit of rub sometimes with mine but i just kinda ignore it. Ta for the link Tag :D

off to rummage in junk draw for washers.............
Logged

tag

  • Guest
(No subject)
« Reply #2 on: April 21, 2007, 10:18:17 PM »
Yeah,

no probs, it says 2x 3mm washers per side i used 2x 2.5 mm washers a total of 5mm and have plenty of clearance
Logged

Sam

  • Guest
(No subject)
« Reply #3 on: April 21, 2007, 10:40:07 PM »
great thanks, ive got 35mm wheel spacers on too (have you?) you'd think they would stop the rub but i still get a real little bit now and again (mind you my tyres are pretty new and the tread is massive). looks like i'll be fiddling with washers tommoro :lol:
Logged

tag

  • Guest
(No subject)
« Reply #4 on: April 21, 2007, 10:46:54 PM »
No,  mine rubbed full lock at the rear of the tyre, if you have side wall lugs on your tyres you may need a little more....good luck
Logged

Mort

  • Guest
(No subject)
« Reply #5 on: April 22, 2007, 02:03:07 PM »
Good reference photos, but I'm not sure how you're supposed fit a body lift to a Cherokee, when it doesn't have a separate chassis! :roll:
Logged

tag

  • Guest
(No subject)
« Reply #6 on: April 22, 2007, 07:33:42 PM »
:?  take it you were looking at the other write ups?  the block under the leaf spring!  call it lowering the Axel, :wink:
Logged

Mort

  • Guest
(No subject)
« Reply #7 on: April 22, 2007, 09:01:46 PM »
Nope!!  You can only fit a body lift if the vehicle has a separate chassis, like a TJ.  The XJ is a monocoque, so what you're suggesting still counts as a suspension lift! 8)
Logged

Sam

  • Guest
(No subject)
« Reply #8 on: April 22, 2007, 09:27:22 PM »
well the poor frenchy man who wrote it maybee just got his translations a bit mixed up :lol:
Logged

tag

  • Guest
(No subject)
« Reply #9 on: April 22, 2007, 09:52:00 PM »
hey man your getting wound up over a few words!!  chill and take a pill, :lol:  you can see what the guy means............
Logged

Mort

  • Guest
(No subject)
« Reply #10 on: April 23, 2007, 10:48:51 AM »
Quote from: "tag"
hey man your getting wound up over a few words!!  chill and take a pill, :mrgreen:
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal