Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Diff gone bang.  (Read 4699 times)

0 Members and 1 Guest are viewing this topic.

tankdoctor

  • Guest
Diff gone bang.
« on: January 05, 2008, 11:32:58 AM »
Well after a couple of months of trouble free motoring :o ,the diff decided it had enough last night.It's amazing how far you can slide when the back axle locks up at 30mph!!!!.I took the diff cover of this morn and once i had fought my way thru all the bits of metal ie x2 spider gears and sheared pins ,god knows where the roll pins are!I think its time to start calling the breakers.
question though,is the cherry 4.0 axle the same(no LSD)?
bugger,fncuk,fnuck.
Logged

isle of man

  • بعض العضو التناسلي النسوي...
  • Club Member
  • Forum Member
  • *
  • Guru: 6
  • Offline Offline
  • Posts: 11537
  • Vehicle: G-Class AKA “The G spot”
  • Take the road less travelled...
    • http://www.4x4.im
(No subject)
« Reply #1 on: January 05, 2008, 11:39:15 AM »
kd has them in stock................cost humble mooolar.





peter henry
Logged
"Not all those who wander are lost"

Mike Pavelin

  • Guest
(No subject)
« Reply #2 on: January 05, 2008, 12:06:19 PM »
A Cherokee axle will not fit. The spring mounts are the wrong way up. The internals will interchange however but you need the right final drive ratio.
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #3 on: January 05, 2008, 01:43:17 PM »
best to look for a breaker yj i would guess. is your carier fooked or saveable? the reason i ask is that you might try mik stansfield at rednex for the parts from a truck that has been re-geared.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal