Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Fitting a towbar to a ZJ......Electrics pic uploaded  (Read 8169 times)

0 Members and 1 Guest are viewing this topic.

RockingDad

  • Guest
Fitting a towbar to a ZJ......Electrics pic uploaded
« on: February 02, 2008, 12:04:13 AM »
Hi all,

Got hold of a towbar, waiting for it to be delivered. Can someone advise me what bolts/nuts I need to fit it.... or are there nuts already welded to the chassis and I just need the bolts?

Are there any pitfalls I should be wary of? as i'm getting secondhand I have no installation instructions.

Appriciate any heads up.

Cheers

Rockingdad
Logged

Dave69

  • Club Member
  • Guru
  • *
  • Guru: 15
  • Offline Offline
  • Posts: 9457
  • Vehicle: CJ-7 4.2 auto
  • Year: 1979
(No subject)
« Reply #1 on: February 02, 2008, 10:35:04 AM »
a good chance the bolts ill be imperial rather than metric
Logged
XJ 2.5 diesel - dead. XJ 4.0 6" lift - sold to some lucky person
CJ7 4.2 auto standard(ish)
Alfa 147 jtdm

RockingDad

  • Guest
(No subject)
« Reply #2 on: February 02, 2008, 10:47:15 AM »
Thats a good point. Also where is the best point (or indeed is there a dedicated point) for the electrics loom to go into the vehicle.

RockingDad
Logged

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #3 on: February 02, 2008, 03:30:34 PM »
the bolts, should be the same ones, that hold on the bumper, I think, I'll have a looksee at mine later :D

there is a grommet on the nearside, again I'll have a look tommorow :D
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

RockingDad

  • Guest
(No subject)
« Reply #4 on: February 02, 2008, 03:48:04 PM »
Cheers Daggie    :D
Logged

RockingDad

  • Guest
(No subject)
« Reply #5 on: February 03, 2008, 01:39:29 PM »
ok, i've had a look behind the pasenger rear light and the picture below is whats there.

Anything here look like the 'tow package'?????

Would be nice to just plug something in rather than have to install something.

Cheers, RD

Logged

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #6 on: February 03, 2008, 03:24:34 PM »
ooh, that looks posh :lol:

up tho the right of that module, there might be summat I can't remember  :roll:
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #7 on: February 03, 2008, 03:30:46 PM »
in that pic of the towbar, is that a ten pin socket on the end of that wire,but only seven pins used?
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

RockingDad

  • Guest
(No subject)
« Reply #8 on: February 03, 2008, 04:56:45 PM »
don't know. i'm waiting for it to turn up....if it is... is that a factory plug to plug into the 'tow package'?

Whats posh bout it? (puzzled)

RD
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #9 on: February 03, 2008, 04:59:46 PM »
You're looking at the lamp outage module (works with the VIC to tell you when a tail lamp bulb is gone)
The factory actually fitted a tow package, there should be a socket behind the rear bumper. The bad news is it is configured for american lighting and no good to us. The genuine Mopar wiring kit for the UK Had all the bits to rewire the outage module and tow package to make it work with a 7 pin tow socket.
Aftermarket towbars are usually just wired into the back of the tail lights and work fine.
Logged

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #10 on: February 03, 2008, 05:10:36 PM »
posh, lamp outage module :lol:
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

RockingDad

  • Guest
(No subject)
« Reply #11 on: February 03, 2008, 05:11:31 PM »
cheers mike......guess i'll have to get a bulb outage compatible wiring kit and a circuit diagram so i know what wires to splice into.

RD
Logged

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #12 on: February 03, 2008, 05:38:45 PM »
on mine, i just scotchlocked the wires works fine :roll: was two years ago :shock:
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

Mike Pavelin

  • Guest
(No subject)
« Reply #13 on: February 03, 2008, 06:37:33 PM »
Just go to Halfords, you'll get a wiring kit and instructions on how to splice into the tail lights for about £15
Logged

RockingDad

  • Guest
(No subject)
« Reply #14 on: February 03, 2008, 07:11:50 PM »
Quote from: "daggie"
posh, lamp outage module :lol:

Cheers guys....... did you manage to see where the grommit is to get the cable into the boot?
Logged

daggie

  • Moderator
  • Guru
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #15 on: February 03, 2008, 07:39:56 PM »
:oops:  bugger
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

RockingDad

  • Guest
(No subject)
« Reply #16 on: February 06, 2008, 05:22:19 PM »
For those how may have been in the same position as me I now have the witter tow bar installation guide which details bolts etc as well.

If anyone needs it let me know and i'll email it to you.

Just got to figure out the wiring.

Regards

RD
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal