Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Glow plugs 3.1TD  (Read 7099 times)

0 Members and 1 Guest are viewing this topic.

markhgg

  • Guest
Glow plugs 3.1TD
« on: March 30, 2008, 10:47:20 PM »
Hi guys, im mark, got a w reg 3.1td that takes ages to start when cold, got some new glow plugs today, but how easy to change myself.
Logged

greggmo

  • Founder
  • Guru
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #1 on: March 30, 2008, 11:35:23 PM »
have a look and see how they are to get at. all ya gotta do is swap new for old. should be an easy job.
Logged

tim_aka_tim

  • Club Member
  • Guru
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #2 on: March 31, 2008, 12:04:08 AM »
The front four are easy enough, but the rearmost one is a bit of a pig - a bit cramped to get to, so watch your fingers. Stick with it, it's not that difficult and there are no special instructions, just pull off the rubber plug (pull hard), unscrew the old one with a sparkplug socket, then screw the new one in and replace rubber plug.
Logged

markhgg

  • Guest
(No subject)
« Reply #3 on: March 31, 2008, 08:04:59 PM »
Quote from: "tim_aka_tim"
The front four are easy enough, but the rearmost one is a bit of a pig - a bit cramped to get to, so watch your fingers. Stick with it, it's not that difficult and there are no special instructions, just pull off the rubber plug (pull hard), unscrew the old one with a sparkplug socket, then screw the new one in and replace rubber plug.


   
   Thanks tim, it was the back one i didnt like the look of.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal