Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: GUAGES  (Read 6989 times)

0 Members and 1 Guest are viewing this topic.

cleggy

  • Guest
GUAGES
« on: June 25, 2008, 09:01:43 PM »
IM LOOKING FOR SOME ADVICE GUYS!!!ALL MY GUAGES HAVE CEASED WORKING!!!(OIL,PETROL ETC)ITS HAPPENED BEFORE AND A WHALLOP HAS USUALLY SOLVED THE PROBLEM BUT NOT THIS TIME :cry: ANY ADVICE OR HELP WOULD BE VERY WELCOME!!!!
Logged

Carlos Fandango

  • Guest
(No subject)
« Reply #1 on: June 25, 2008, 09:17:24 PM »
That sounds like a dodgy connection on the rear of the dash console, probably a loss of the 12v supply, get the instrument bezel out and check connections or soldered joints on the circuit boards.

Unless someone else knows better  :wink:
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #2 on: June 25, 2008, 09:18:53 PM »
It's standard. Take the instrument cluster out and treat the connectors with contact spray.
Logged

PtP

  • Club Member
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 872
  • Stourbridge, West Midlands
(No subject)
« Reply #3 on: June 25, 2008, 10:45:48 PM »
I sometimes find the ignition key does not always click back into its proper position immediately after starting the TJ and the first thing I notice is that the indicators don’t work. A quick fiddle with the key always fixes the problem!

I can’t say I’ve noticed the gauges not working, so it’s probably a completely different problem! :-)
Logged
Peter

aussie_b

  • Guest
(No subject)
« Reply #4 on: June 26, 2008, 07:04:19 AM »
My temperature gauge doesn't seem to work although all others are OK, not sure if it's a common problem but it's sure a pain in the butt...
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal