Topic: i have a monkey on my back (Read 65665 times)

doublej · « **Reply #250 on:** August 06, 2010, 11:11:06 PM »

well alittle late due too not having internet for a week but here we go

finally finished the oil pan modding

mount the rad in the back due to it being about an inch to height
you can also see how the fuel cell is now getting mounted

the actual mounts

slowly starting to shape up

start of the exhaust

then time for the flexing
bad shot but this is where the axle actually started to go under itself if that makes sence

front deff had more to go

wrangler07 · « **Reply #251 on:** August 07, 2010, 09:18:28 AM »

Have to say, I'm thoroughly enjoying keeping up with this project. Thanks for the great write-up and pics stream. Looking forward to seeing this one finished.

Bubba · « **Reply #252 on:** August 07, 2010, 09:26:58 AM »

Dave69 · « **Reply #253 on:** August 07, 2010, 11:41:34 AM »

nice flex ,

isle of man · « **Reply #254 on:** August 07, 2010, 02:48:04 PM »

Indeed...

doublej · « **Reply #255 on:** August 12, 2010, 10:39:28 PM »

thanks guys.... its been a long week but slowly the monkey is coming together. ill have some photos up in the next day or 2.

Bubba · « **Reply #256 on:** August 12, 2010, 10:50:05 PM »

lookin forward to it

doublej · « **Reply #257 on:** August 16, 2010, 07:11:44 PM »

so i only have a few photos, i thought i had taken more but i guess in the madness last week i didnt really pick the camera up as much.
Good things to note is all major fab work is pretty much finished. Just a couple hours of finish welding here and there, wiring back in, run fuel lines, and run rad hoses. only metal left to add is a few gussets and a bracket or two.
I did learn i can wave a tig torch, i just need alot more time with it.
steering just needs a gusset or two

tie rod side

axles side which needs the gussets

dropped the floor to try and get the fuel cell as low as i could, but couldnt get it below rear tube work like i wanted

hubs painted and finished..... or so we thought

then we found these were rubbing each other

Dave69 · « **Reply #258 on:** August 16, 2010, 10:15:31 PM »

are you using off the shelf paint or 2 part enamel ?

doublej · « **Reply #259 on:** August 17, 2010, 03:35:01 PM »

Quote from: Dave69 on August 16, 2010, 10:15:31 PM

are you using off the shelf paint or 2 part enamel ?

POL rattle can and hammerlite brush on
what do i look like some posh twit, rattle can till i die

Dave69 · « **Reply #260 on:** August 19, 2010, 09:40:53 PM »

didn't no whether you managed to get some std issue hd paint at a good cost price from the works stores.

brush hammerite and spray can works for me

wrangler07 · « **Reply #261 on:** September 13, 2010, 10:18:19 AM »

Missing my weekly fix on this one!!

Any updates?

toyota_man82 · « **Reply #262 on:** October 31, 2010, 03:43:40 PM »

Get some more damn pics!

wrangler07 · « **Reply #263 on:** October 31, 2010, 05:25:33 PM »

Quote from: toyota_man82 on October 31, 2010, 03:43:40 PM

Get some more damn pics!

Tank · « **Reply #264 on:** October 31, 2010, 06:05:34 PM »

All looking good JJ,keep it coming

doublej · « **Reply #265 on:** October 31, 2010, 08:16:13 PM »

broke the front driveshaft 3 times basicly over the 2 days
was told i drive too slow
found out how bad 2wd is
was told i drive too fast
oh yeah and put a watermelon size hole in one of my portal boxes

BIG THANKS to kingcj - without his help over the last couple months this weekend wouldnt have happened

Bubba · « **Reply #266 on:** October 31, 2010, 08:27:46 PM »

looks very good jj

wildwood · « **Reply #267 on:** October 31, 2010, 09:03:14 PM »

Very well done mate

I mean the getting it finished........... not the metal mayhem

At least you have found the weak spots

toyota_man82 · « **Reply #268 on:** November 01, 2010, 05:12:53 PM »

Nice to see the old girl on the site. Good job man!

wrangler07 · « **Reply #269 on:** November 01, 2010, 06:32:36 PM »

Great to get an update. That course looked awesome and the Jeep, too!

Dave69 · « **Reply #270 on:** November 01, 2010, 09:19:27 PM »

nice to see it rolling as intended.

teething troubles or learning curve on the jeep abilities or limitations

momos · « **Reply #271 on:** November 03, 2010, 10:42:29 PM »

nice one JJ!

doublej · « **Reply #272 on:** November 05, 2010, 08:16:21 PM »

hey guys looking for a later model soft top
like this one
http://cgi.ebay.co.uk/Bikini-Top-Traditional-Bestop-Jeep-CJ-Wrangler-YJ-76-91-/300480189895?pt=Automobilia_DE&hash=item45f603d5c7
but deff cheaper

Tank · « **Reply #273 on:** November 05, 2010, 11:34:12 PM »

Think i might have a near new Bestop CJ one,charcoal in colour

doublej · « **Reply #274 on:** November 06, 2010, 03:10:33 AM »

Quote from: Tank on November 05, 2010, 11:34:12 PM

Think i might have a near new Bestop CJ one,charcoal in colour

charcoal would be perfect - just let me know and what you want for it mate?

Author Topic: i have a monkey on my back (Read 65665 times)

doublej

wrangler07

doublej

doublej

doublej

wrangler07

toyota_man82

wrangler07

Tank

doublej

toyota_man82

wrangler07

momos

doublej

Tank

doublej