Topic: tales from the workshop (Read 253482 times)

Dave69 · « **Reply #475 on:** April 06, 2010, 11:13:50 PM »

that is a thin sill.

looks more like a cosmetic finish for the door lower rather than a structural piece. It may be a design feature to create a false sill.

Can't you put box section in the hole between the chassis rail and the sill and then have a sacrificial bash strip which extends out past the doors and bolts to the box section.

isle of man · « **Reply #476 on:** April 07, 2010, 01:04:11 PM »

Will not be this week - try for next!!

Bubba · « **Reply #477 on:** April 07, 2010, 05:30:09 PM »

a full chasis so we need somthing that is fixed to the chasis and also protects the sills not easy if we are to try and keep ground clearance this could be fidley

isle of man · « **Reply #478 on:** April 07, 2010, 05:36:24 PM »

Go through the sill not under!!!!

Dave69 · « **Reply #479 on:** April 07, 2010, 06:47:06 PM »

was thinking along the lines of this, relatively simple to do.

you might want to elaborate on what you mean by "going through the sill"

isle of man · « **Reply #480 on:** April 07, 2010, 07:51:16 PM »

More like this....

Bubba · « **Reply #481 on:** April 07, 2010, 08:07:24 PM »

that is what i had in my head but it will need a to cover the side iof the cill too

Dave69 · « **Reply #482 on:** April 08, 2010, 10:18:26 AM »

interesting to see what idea you finally come up with

Bubba · « **Reply #483 on:** April 08, 2010, 05:45:25 PM »

greggmo has a far better eye for fabrication than me and he will be taking the lead my ideas will only add to the ramblings

Dave69 · « **Reply #484 on:** April 08, 2010, 06:20:37 PM »

you mean he'll be doing the welding and you'll be painting and drinking the tea

Bubba · « **Reply #485 on:** April 08, 2010, 06:58:34 PM »

not quite but not far off i think there will be plenty for both of us to do

isle of man · « **Reply #486 on:** April 08, 2010, 08:06:05 PM »

Can't wait....

Panic mechanic! · « **Reply #487 on:** April 09, 2010, 11:08:56 AM »

so MJS is a ghay Gharage?

Bubba · « **Reply #488 on:** April 09, 2010, 04:59:57 PM »

never

Dave69 · « **Reply #489 on:** April 09, 2010, 08:05:46 PM »

it needs quary stone floor tiles before it gets to ghay status

Dave The Sparky · « **Reply #490 on:** April 09, 2010, 09:14:19 PM »

And a hot tub in the corner

gazjeep · « **Reply #491 on:** April 11, 2010, 04:51:13 PM »

Quote from: isle of man on March 27, 2010, 08:57:24 PM

I can leave it.

The sliders must be jackable with the high lift - perhaps put those round locators in.

Apologies for taking so long Mr H.
This is what we have, round bar locators to stop the hi lift moving / slipping as opposed to tubes which could get crud in them, just a thought

gazjeep · « **Reply #492 on:** April 11, 2010, 04:53:33 PM »

And finally

greggmo · « **Reply #493 on:** April 11, 2010, 09:26:12 PM »

i have a plan.

isle of man · « **Reply #494 on:** April 11, 2010, 09:28:31 PM »

Brilliant!!!

Bubba · « **Reply #495 on:** April 11, 2010, 09:32:19 PM »

teamwork will sort it and lots of toast done in the frying pan

greggmo · « **Reply #496 on:** April 11, 2010, 09:34:35 PM »

mmmmmmmm fried toast.

Dave69 · « **Reply #497 on:** April 11, 2010, 09:39:16 PM »

Quote from: isle of man on April 11, 2010, 09:28:31 PM

Brilliant!!!

you misunderstand, the plan is a fryup

isle of man · « **Reply #498 on:** April 11, 2010, 09:40:55 PM »

Ahhh but it's a plan!!!!

Bishops Finger · « **Reply #499 on:** April 11, 2010, 09:47:41 PM »

mm...fryups...

Author Topic: tales from the workshop (Read 253482 times)

Panic mechanic!

Bishops Finger