Topic: FUBAR transfer box mount (Read 8374 times)

Lornaben · « **on:** January 16, 2009, 05:07:17 PM »

Got the chnace to get under the jeep this afternoon and found this. The 'U' channel should be bonded in the rubber and central. As you can see its come out and moved nearly an inch backwards causing the engine to tuch the bulk head .... LOADS of vibration :evil:

MOCAJ · « **Reply #1 on:** January 16, 2009, 05:43:35 PM »

yep, that looks fooked

Lornaben · « **Reply #2 on:** January 17, 2009, 05:55:06 PM »

Spare mount fitted. What a feckin pain that was. 2 ton ratchet straps managed to pull it back in line 8-)

greggmo · « **Reply #3 on:** January 17, 2009, 11:52:57 PM »

some times ya cant beat the old ratchet strap for stuff like that. 8-)

Bubba · « **Reply #4 on:** January 18, 2009, 09:47:16 AM »

well done mate now to chase down that wobbler and everthings sweet again 8-)

scrw · « **Reply #5 on:** January 18, 2009, 09:47:22 AM »

Straightening the bulkhead up on my lardy LOL

Lornaben · « **Reply #6 on:** January 18, 2009, 05:37:24 PM »

Quote from: "V8 Bubba"

now to chase down that wobbler

Fitted the spare bell crank and that still has a bit of play, but loads less than than the one coming off. So I can strip the other one and rebuild it. :evil:

When I've got that sorted, I can get them seats and harnesses fitted and go out to play again 8-)

Bubba · « **Reply #7 on:** January 18, 2009, 05:38:57 PM »

so the plan is coming together then

Author Topic: FUBAR transfer box mount (Read 8374 times)

Lornaben

FUBAR transfer box mount

MOCAJ

(No subject)

Lornaben

(No subject)

greggmo

(No subject)

Bubba

(No subject)

scrw

(No subject)

Lornaben

(No subject)

Bubba

(No subject)