Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Cherokee / Grand Cherokee front axle  (Read 10073 times)

0 Members and 1 Guest are viewing this topic.

dxmedia

  • Guest
Cherokee / Grand Cherokee front axle
« on: January 21, 2009, 01:57:58 PM »
The XJ front axle seems to have a number of benefits over the ZG, ujs on the halfshafts, UJ on the prop flange.

Are both axles interchangable (if they both came off a 4.0 i6) and are the diff ratios the same?

Not that I've an aversion to CV's or anything  :lol:
Logged

wildwood

  • The 1 Tonne Kid
  • Marshal
  • Guru
  • *
  • Guru: 14
  • Offline Offline
  • Posts: 5921
CVssss
« Reply #1 on: January 21, 2009, 02:57:10 PM »
Shooting from the hip here but last months JP mag had a letter or answer to a letter that said the UJ axle half shafts and stub axles will fit the CV axles because the knuckles are the same.
Any help?
Logged

dxmedia

  • Guest
(No subject)
« Reply #2 on: January 21, 2009, 03:04:53 PM »
So i could just pull the bits I need and swap :D

Sweet :D
Logged

Dodster

  • Guest
(No subject)
« Reply #3 on: January 21, 2009, 04:27:03 PM »
This thread may help...
http://www.birtydastardsjeepclub.com/fo ... =tone+ring

This is the missing pic from the above thread, ignore the scrawl that was for someone else...  :lol:
 
Logged

tartanzj

  • Guest
(No subject)
« Reply #4 on: January 22, 2009, 10:23:39 AM »
My ZG has UJ's as standard on front prop and axle so reckon it should just be a straight swap.

Have a look here http://www.nagca.com/forum/showthread.p ... t=cv+joint
Logged

dxmedia

  • Guest
(No subject)
« Reply #5 on: January 22, 2009, 11:44:37 AM »
Thanks,  I need to rebuild one of the cv's later on, the boots split and just waiting for it to turn up now.

I'll have a look at the condition of the thing, if it's looking worn I'll ring around about the price of a couple of uj shafts.

I've smashed that many CV's now off roading (record is 4 in 8 hours) uj's are going to be the better option ;)
Logged

MOCAJ

  • Club Member
  • Guru
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 6366
(No subject)
« Reply #6 on: January 22, 2009, 12:53:15 PM »
Quote from: "dxmedia"
I've smashed that many CV's now off roading (record is 4 in 8 hours) uj's are going to be the better option :wink:
Logged
short term jeep owner since 2005, every truck is a never ending project. Birtys, the best club in Jeepland

wazza

  • Guest
(No subject)
« Reply #7 on: January 23, 2009, 06:17:36 PM »
just get yourself a set of shafts for an xj an swap them, thats all ive done.

ill be swaping the pinion yoke next an putting a normal prop on.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal