Topic: Control arm Bushes (Read 8442 times)

tedthefed · « **on:** March 28, 2009, 07:49:31 PM »

Finally sorted out the Blue Jeep (Tims old one) put new lower control arm bushes in today around 1.5 hours in all. Failed its MOT last October but just got round to sorting so back on track next wek. Free re test thankfully.

greggmo · « **Reply #1 on:** March 28, 2009, 08:39:15 PM »

how could it need new bushings? they aint done 1000 miles. did ya keep the old ones ted?

tedthefed · « **Reply #2 on:** March 28, 2009, 08:53:28 PM »

Yes got the old ones but had to cut them out

Bubba · « **Reply #3 on:** March 28, 2009, 09:45:19 PM »

taking a ride

Dave69 · « **Reply #4 on:** March 28, 2009, 10:50:50 PM »

did you consider tightening the bolt a bit instead of swapping the bushes

tedthefed · « **Reply #5 on:** March 29, 2009, 10:54:00 AM »

Tried tightening but did not work , on removal the metal inside just dropped out.

Mike Pavelin · « **Reply #6 on:** March 29, 2009, 12:12:10 PM »

Remember that the bolts for these bushesshould not be tightened until the full weight of the Jeep is on the wheels. If you do it with the axle hanging the bushes will rip out in no time.

Dave69 · « **Reply #7 on:** March 29, 2009, 06:05:57 PM »

Quote from: "tedthefed"

Tried tightening but did not work , on removal the metal inside just dropped out.

probably the reason to swap the bushes

Author Topic: Control arm Bushes (Read 8442 times)

tedthefed

Control arm Bushes

greggmo

Re: Control arm Bushes

tedthefed

Re: Control arm Bushes

Bubba

Re: Control arm Bushes

Dave69

Re: Control arm Bushes

tedthefed

Re: Control arm Bushes

Mike Pavelin

Re: Control arm Bushes

Dave69

Re: Control arm Bushes