Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bluesleeper]

Hey there guys, just wondering where the best place to pick the wiring up for towbar electrics is?
are there any pre cut holes to thread the wiring through or where is the best place to dril??
Any info/ pics/advice will be gratefully recieved!

Cheers,

Gareth.

[Dave69]

one place is to pull a light cluster out and connect to the relevant lights. there should be a gromment just below that goes into the wheel arch which you can drill and feed a wire through

[Mike Pavelin]

Go to Halfords and get a wiring kit.

[bluesleeper]

I have the wiring kit ready, I just wanted to know which side was best to connect to because i will need wiring for both indicators etc and if there were any existing holes i can utilise for the wiring.

Thanks for the input guys,

Gareth.

[neilhull]

Fitted wiring on the drivers side on my cherry . there is not much room on the passengers side as you have the petrol filler .    I ran a two wire from the passenger side to the drivers side this i ran under the plastic trim at rear of boot .
  To get the towbar wire in to the drivers side i took the light cluster of and drilled a hole just below it