Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: XJ brake hose extensions  (Read 7557 times)

0 Members and 1 Guest are viewing this topic.

Anonymous

  • Guest
XJ brake hose extensions
« on: August 17, 2005, 03:25:47 PM »
With a 3" lift & disconnects do I need to do this & if so front & back????

Opinions please guys.......
Logged

chrisjones

  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #1 on: August 17, 2005, 03:44:04 PM »
Not tellin' !!!!!!!!! :twisted:
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

Anonymous

  • Guest
(No subject)
« Reply #2 on: August 17, 2005, 03:45:39 PM »
Arse!!!!!!! :smt097
Logged

horobi

  • Guest
(No subject)
« Reply #3 on: August 17, 2005, 03:49:45 PM »
NEED!! NEED!!! when did need ever have anything to do with spending money on a Jeep....... WANT that's what it's all about!!!

 :roll:
Logged

chrisjones

  • Forum Member
  • *
  • Guru: 4
  • Offline Offline
  • Posts: 5841
  • Vehicle: Dogface
  • Sometimes I wonder....
(No subject)
« Reply #4 on: August 17, 2005, 03:50:05 PM »
:finga:  :finga:
Logged
God was my copilot but we crashed in the mountains and I had to eat him.

Anonymous

  • Guest
(No subject)
« Reply #5 on: August 17, 2005, 03:51:39 PM »
Quote from: "horobi"
NEED!! NEED!!! when did need ever have anything to do with spending money on a Jeep....... WANT that's what it's all about!!!

 :lol:
Logged

greggmo

  • Founder
  • Forum Member
  • *
  • Guru: 2
  • Offline Offline
  • Posts: 8230
(No subject)
« Reply #6 on: August 17, 2005, 05:36:56 PM »
kd you need to get it all fitted up and then undo your disco,s and lift the truck up and see how the lines look. in some cases you can just relokate the bottom hose bracket and gain just enough. i think you should be ok but you do need to test it out by getting maximum flex. 8)
Logged

Mike Pavelin

  • Guest
(No subject)
« Reply #7 on: August 17, 2005, 05:48:37 PM »
Fit a longer hose to the rear and at the front unbolt the bottom of the metal pipes on the inner fenders straighten out the S-bends and refix them lower down.
Logged

Woody

  • Guest
(No subject)
« Reply #8 on: August 17, 2005, 09:30:49 PM »
If you can afford it fit extended brake lines.  Seem to remember a long time ago a discussion on here about prices.  OffroadMDG's prices were competetive enough that someone (sorry can't remember who) was looking at me bringing a set up on one of my trips to Dudley.  If you are going to JeepFest Mark may even chuck a set in the back for you to have a skeg at, if he has any in stock.

Woody
Logged

daggie

  • Moderator
  • Forum Member
  • *
  • Guru: 3
  • Offline Offline
  • Posts: 3447
(No subject)
« Reply #9 on: August 18, 2005, 06:35:37 PM »
or get a set for a yj/tj they be longer
Logged
Grand cherry, 3.0 crd Overland
Grand cherry, 2.7 crd
95, Cherry, aka Blackie      P38 range rover

JamesH

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4998
  • Vehicle: JK
  • Year: 2010
(No subject)
« Reply #10 on: August 19, 2005, 01:04:21 PM »
I fitted a YJ rear brake hose fron Lighthouse to sort mine out with 3" lift. At full extension the fronts were actually ok - maybe I need to spend more on even longer shocks  :wink:
Logged

kizer

  • Guest
(No subject)
« Reply #11 on: September 12, 2005, 07:14:33 AM »
On my TJ everybody kept telling me if I went to 3-inches I would need longer brake lines. Needless to say Im just around 4-inches or heck maybe even a bit more and Im running stock brakelines on my TJ.

On the front of a TJ there is a clip that is screwed into frame just above the axle. I unscrewed the clip and pulled down the clip as far as it would go moving the hard line down with it. I gained roughly 2-inches in length on both sides and they work great.

If you have even a question do what you can do for free first then spend the extra cash. The YJ brake lines are longer than the TJ's for reference.  :D

http://home.comcast.net/~yokomura/tech/brakelines/
Logged

kizer

  • Guest
(No subject)
« Reply #12 on: September 12, 2005, 07:16:10 AM »
For the rear I would simply follow your hard lines and see what and how they move to establish the rear. With my TJ I didnt do anything and there doesn't seem to be any problems.
Logged
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal