Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: OBD2 Scanner  (Read 8100 times)

0 Members and 1 Guest are viewing this topic.

PtP

  • Club Member
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 872
  • Stourbridge, West Midlands
OBD2 Scanner
« on: April 26, 2009, 08:44:45 PM »

Will an OBD2 Scanner read any different engine management error codes to those I can find using the usual method via the odometer?

I’ve still got an occasional misfire on my TJ. So far I’ve replaced:
the plugs,,
the distributor cap,
the distributor rotor and
the up-stream O2 sensor.

The misfire seems to be totally random. It happens whilst driving on a very light throttle, under acceleration, whilst pulling away gently and I’ve also had the engine popping back through the snorkel. I’m not getting any error codes showing up via the odometer and I’m also not getting the Engine Management Light on.

I’ve searched around on the US JeepForum and there is plenty of talk about using the OBD2 Scanners to help pin-point this type of problem, but I’m not sure it will work on my ’97 TJ 4.0.

Anyone???
Logged
Peter

scrw

  • Guest
Re: OBD2 Scanner
« Reply #1 on: April 26, 2009, 08:47:52 PM »

You got a spare TPS you could try on it?
Logged

Panic mechanic!

  • Guest
Re: OBD2 Scanner
« Reply #2 on: April 26, 2009, 08:49:09 PM »

if you got an obdII port yes, it could help if the problem occurs while it is running and plugged in.
(ps don't buy an obdII lead to connect to your laptop, i got one,never worked yet)
Logged

PtP

  • Club Member
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 872
  • Stourbridge, West Midlands
Re: OBD2 Scanner
« Reply #3 on: April 26, 2009, 08:54:39 PM »

Quote from: "scrw"
You got a spare TPS you could try on it?
Nope! Have you got one I could borrow?

I've also read it could be the CPS, MAF sensor, a dodgy injector amongst others. :roll:
Logged
Peter

scrw

  • Guest
Re: OBD2 Scanner
« Reply #4 on: April 26, 2009, 09:05:35 PM »

I have one, dunno it it will fit tho, off a 95 4l XJ, how many pin plug is on yours
Logged

PtP

  • Club Member
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 872
  • Stourbridge, West Midlands
Re: OBD2 Scanner
« Reply #5 on: April 26, 2009, 09:17:28 PM »

Quote from: "Panic mechanic!"
if you got an obdII port yes, ...........
It has. :-D
Logged
Peter

PtP

  • Club Member
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 872
  • Stourbridge, West Midlands
Re: OBD2 Scanner
« Reply #6 on: April 26, 2009, 09:18:46 PM »

Quote from: "scrw"
............... how many pin plug is on yours
I'll have a look tomorrow.
Logged
Peter

scrw

  • Guest
Re: OBD2 Scanner
« Reply #7 on: April 27, 2009, 08:38:20 AM »

have a scanner & spare tps you can borrow, just need to work out a way to get them to you
Logged

PtP

  • Club Member
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 872
  • Stourbridge, West Midlands
Re: OBD2 Scanner
« Reply #8 on: April 27, 2009, 11:18:37 AM »

Quote from: "scrw"
have a scanner & spare tps you can borrow, just need to work out a way to get them to you
Top man! I'll drop you a PM.
Logged
Peter

PtP

  • Club Member
  • Guru
  • *
  • Guru: 0
  • Offline Offline
  • Posts: 872
  • Stourbridge, West Midlands
Re: OBD2 Scanner
« Reply #9 on: May 02, 2009, 07:49:40 PM »

Well! I decided to buy one of the cheap scanners off ebay but it didn’t show up any new error codes. :wink: )

So I did what I should have done months back and I replaced the plug leads; it’s now running as sweet as a nut! :-D

If anyone in and around the area who wants to use the scanner for diagnosis and/or reset the dash warning light, then just give me a shout!
Logged
Peter

Bubba

  • "Cooter"
  • Marshal
  • Guru
  • *
  • Guru: 69
  • Offline Offline
  • Posts: 21029
Re: OBD2 Scanner
« Reply #10 on: May 03, 2009, 10:08:15 AM »

i will have a look on me cj for a port :wink:
Logged


trucks


shedric
cletus
mr whippy

I spent most of my money on alcohol, women and old  iron........ the rest of it I just wasted.

Panic mechanic!

  • Guest
Re: OBD2 Scanner
« Reply #11 on: May 03, 2009, 05:46:15 PM »

inlet or exhaust?
Logged

gazjeep

  • Marshal
  • Forum Member
  • *
  • Guru: 9
  • Offline Offline
  • Posts: 7280
  • Vehicle: TJ - Der Panzer - CBR
Re: OBD2 Scanner
« Reply #12 on: May 03, 2009, 06:54:30 PM »

Neither, 20 year old Tawny port like IOM would quaff  :mrgreen:
Logged
Taking ya girl to heaven & back
Pages: [1]   Go Up
 

Powered by EzPortal