Topic: sunny workshop (Read 14191 times)

Bubba · « **Reply #25 on:** October 01, 2010, 09:19:18 PM »

yeah i got stuff pending was thinking bout taking my engine out on sunday to sort a peeve

Panic mechanic! · « **Reply #26 on:** October 02, 2010, 12:33:23 AM »

Quote from: my other cars a jeep on October 01, 2010, 09:15:51 PM

re-fit front prop

I'll do that for you mate if you need a hand.

MOCAJ · « **Reply #27 on:** October 02, 2010, 01:47:16 PM »

thanks for the offer Rob, but it needs to go back on Paul's truck

Bubba · « **Reply #28 on:** October 02, 2010, 01:52:30 PM »

nice try though dood

MOCAJ · « **Reply #29 on:** December 19, 2010, 10:22:07 PM »

wish i had fitted that front prop back then

was fookin cold and wet lying on the ground fitting it today, got 4wd for tomoz tho

MOCAJ · « **Reply #30 on:** February 27, 2011, 06:23:01 PM »

got soaked fitting a front hub today

sorted the garage out a bit then helped a guy down the road with his 4.7 WJ.

Showed him how to get trouble codes using the key so he dont have to pay next time

Bloody weather, turned out real nice later on

MOCAJ · « **Reply #31 on:** April 10, 2011, 05:05:52 PM »

started prepping the 03 for MOT and sale today.

Took off a few bits for spraying and cleaning all the off road shit from underneath, greasing and checking as i went.

Thought i had got a real good tan until i had a bath and washed it all off

Dave69 · « **Reply #32 on:** April 10, 2011, 09:18:45 PM »

adjusted the rear brakes on the xj, had to take the wheels and drums off as i never remember which direction the adjusters go

MOCAJ · « **Reply #33 on:** April 22, 2011, 05:20:23 PM »

it was a sunny workshop today, been busy

Had 2 tyres fitted to Paul's Astra. Looking at those I think 33's are a bargain just for how much rubber you get for your money !
Then went to have a look at a couple of new rides for Gail, V nice

Expected to find a leaky rear wheel cylinder on 97, found its axle oil so halfshaft seals have gone, cleaned up and adjusted brakes that side
Other side wheel cylinder was leaking so replaced, also found play in wheel bearing so have done a couple of jobs and found more to do
Might bite the bullet and replace bearings and seals both sides

Now its on to the 53, prep for MOT as it's gotta go soon

MOCAJ · « **Reply #34 on:** May 02, 2011, 06:45:21 PM »

another sunny day and lots of jobs done

97- removed radiator and jet washed through, replaced viscous fan coupling which had around 4mm of play, idler pulley next to alternator and found small idler had lots of play so swapped with one from 98. Re-filled rad with anti freeze, K seal and water, seems OK

Good news on the idler pulleys is that it looks like a standard 6203RS bearing so will try to press them out tomoz and fit new

Also replaced broken screw in door check strap loop

03- replaced rock rails and indicator guards with freshly sprayed bits

Bulldog67 · « **Reply #35 on:** May 02, 2011, 08:26:49 PM »

im gonna have to keep an eye out for my next project and drop it round seein as u got all this time

MOCAJ · « **Reply #36 on:** May 02, 2011, 11:17:12 PM »

Quote from: Bulldog67 on May 02, 2011, 08:26:49 PM

im gonna have to keep an eye out for my next project and drop it round seein as u got all this time

errrr, thanks but NO THANKS

as 2 out of 3 are always daily drivers and used off road, you can guess maintenance keeps me busy enough

MOCAJ · « **Reply #37 on:** May 15, 2011, 07:59:23 PM »

Vauxhall Astra discs and pads today, no time for jeeping stuff as we had to go to a birthday barbie after 1.00

MOCAJ · « **Reply #38 on:** July 01, 2011, 09:18:35 PM »

got the whole weekend to play, gonna be busy

Cockney Boy · « **Reply #39 on:** July 01, 2011, 09:41:36 PM »

Jesus Steve, you sure your not an octopus? Your going through those jobs like you have 8 arms!!!!!

MOCAJ · « **Reply #40 on:** July 03, 2011, 08:06:17 PM »

the red truck lives, got it started for the first time in 18 months gail reckons

need to free off handbrake and change track rod end at pitman arm and i think its good for MOT

good day in the sun

MOCAJ · « **Reply #41 on:** July 29, 2011, 10:24:22 PM »

looking for 2 days of sun as i have 2 trucks to prepare for MOT this weekend

Lornaben · « **Reply #42 on:** July 29, 2011, 10:40:33 PM »

forecast is good

MOCAJ · « **Reply #43 on:** August 14, 2011, 05:24:17 PM »

spent the last 2 days on 97 for MOT

NEw Front hub bearing, tightened and greased ball joint on end of drag link and all front suspension.

New rear axle bearings and oil seals. Hoping that will do it although i still got some play in that drag link, fingers crossed as i have work elsewhere

gazjeep · « **Reply #44 on:** August 14, 2011, 06:12:44 PM »

Fingers crossed Steve

MOCAJ · « **Reply #45 on:** August 15, 2011, 05:21:49 PM »

all good, green ticket

can now devote all my attention to the red truck for cheapfest

Nosebolt · « **Reply #46 on:** August 15, 2011, 05:26:42 PM »

Bubba · « **Reply #47 on:** August 15, 2011, 05:52:48 PM »

did you go to my prefered test point ? i popped in today to see if they had a few spaces

Panic mechanic! · « **Reply #48 on:** August 15, 2011, 05:57:50 PM »

it was mentioned earlier that you had graced the concrete when I was there.

Bubba · « **Reply #49 on:** August 15, 2011, 06:00:02 PM »

you were ther two ?? fuck was it a pub meet going on ?

Author Topic: sunny workshop (Read 14191 times)

Panic mechanic!

Cockney Boy

Nosebolt

Panic mechanic!