Topic: Refurbing a Warn 8274 (Read 8454 times)

isle of man · « **Reply #25 on:** April 15, 2011, 10:13:26 PM »

Quote from: Dave The Sparky on April 15, 2011, 10:10:06 PM

tri rated cable

http://www.eland.co.uk/documents/Tri-rated%20Cables.pdf

check out its current carrying capacities(at full duty) and then realise how big your cables (and batteries) will need to be to run for any period of time

If you want some, i can get you it and stick some crimps on if you want, but it will only be available in black at that sort of size!

Hmmmmm need to read up some more.....

willo · « **Reply #26 on:** April 15, 2011, 10:14:28 PM »

This is interesting, I would say that one problem with your tri rated cable is that the sheath can only withstand up to 105deg c, I would be inclined to go for some of this:

http://www.eland.co.uk/ss/electricalcable/rubberflexiblecable/cable33/0361tq-black-welding-cable-to-bs638.html

or get what Jim supplies:

http://gigglepin4x4-shop.co.uk/epages/eshop343529.sf/en_GB/?ObjectPath=/Shops/eshop343529/Products/0-983-15

and don't forget to uprate your alternator cables, and your main earth to chassis

Anyhow, enjoy your winch, they are the nuts, oh and keep your hands well back when using it

isle of man · « **Reply #27 on:** April 15, 2011, 10:22:07 PM »

Quote from: Willo on April 15, 2011, 10:14:28 PM

and don't forget to uprate your alternator cables, and your main earth to chassis

Top Tip TA!!!

Dave The Sparky · « **Reply #28 on:** April 15, 2011, 10:41:45 PM »

Quote from: Willo on April 15, 2011, 10:14:28 PM

This is interesting, I would say that one problem with your tri rated cable is that the sheath can only withstand up to 105deg c

With all due respect the welding cable is only rated to operate up to 85deg c if you read the blurb properly

wrangler07 · « **Reply #29 on:** April 15, 2011, 11:55:38 PM »

Mate, if you've done the deal you need to tell the guy to pull the auction 'cause as of now it's live...

normalbloke · « **Reply #30 on:** April 16, 2011, 07:40:20 AM »

I suspect the power cables you are going to need will end up looking as thick as the hydraulic toobs on my Mog winches!

Bubba · « **Reply #31 on:** April 16, 2011, 08:32:42 AM »

wow i would be satisfied just to find a cheap 8274 without going mad over cables and uprating it

isle of man · « **Reply #32 on:** April 16, 2011, 10:08:23 AM »

Quote from: wrangler07 on April 15, 2011, 11:55:38 PM

Mate, if you've done the deal you need to tell the guy to pull the auction 'cause as of now it's live...

Relax it's a done deal!!!

wildwood · « **Reply #33 on:** April 16, 2011, 10:15:16 AM »

Is this monster for the front of the buggy?

Are you going to have to create more 'real estate' to mount it?

Looks good tho.

About a grand cheaper than a full bling Gigglepin...........nice one

isle of man · « **Reply #34 on:** April 16, 2011, 12:05:57 PM »

Quote from: wildwood on April 16, 2011, 10:15:16 AM

Is this monster for the front of the buggy?

Are you going to have to create more 'real estate' to mount it?

Looks good tho.

About a grand cheaper than a full bling Gigglepin...........nice one

Indeed front of the Buggy thinking of buying a Gwyn Lewis mount seen this on EBay

Gigglepin have gone up in price recently have another look

willo · « **Reply #35 on:** April 16, 2011, 12:54:00 PM »

Quote from: Dave The Sparky on April 15, 2011, 10:41:45 PM

Quote from: Willo on April 15, 2011, 10:14:28 PM
This is interesting, I would say that one problem with your tri rated cable is that the sheath can only withstand up to 105deg c

With all due respect the welding cable is only rated to operate up to 85deg c if you read the blurb properly

Doh!

wildwood · « **Reply #36 on:** April 16, 2011, 10:59:34 PM »

The Gwyn Lewis mount seems a bargain. Most of us couldn't buy the steel, do the welding and punt it out for a profit for that amount.

Well at least I couldn't...................but then I am very slow.

So Gigglepin upping their prices.............................. so will they get the business..............

Me..........................I am keeping it ghetto..................Bowmotor 5hp to replace theh vintage 2.5hp............see where we go from there

IrishCJ6 · « **Reply #37 on:** April 17, 2011, 06:41:50 PM »

If your needing a hand with shipping from Ireland to the UK I'm more than willing to assist seeing as you lot on the other side did it for me, Irishgroupage were ok but I have found a better crowd Translandgroup.com, they were half the price and much more professional, everything was over the internet and picked up and dropped off in 2 days, I can even put it on a pallet if its not already on one, let me know if you need assistance.

isle of man · « **Reply #38 on:** April 17, 2011, 07:11:23 PM »

Quote from: IrishCJ6 on April 17, 2011, 06:41:50 PM

If your needing a hand with shipping from Ireland to the UK I'm more than willing to assist seeing as you lot on the other side did it for me, Irishgroupage were ok but I have found a better crowd Translandgroup.com, they were half the price and much more professional, everything was over the internet and picked up and dropped off in 2 days, I can even put it on a pallet if its not already on one, let me know if you need assistance.

This is indeed good news - are you close to Clarecastle Co.clare? I believe the weigh and dimension's are 80cm x 45 cm x 50cm
75kg

Let me see if my contact here comes up with the goods first - will let you know.

Cheers.

IrishCJ6 · « **Reply #39 on:** April 17, 2011, 09:24:40 PM »

Quote from: isle of man on April 17, 2011, 07:11:23 PM

Quote from: IrishCJ6 on April 17, 2011, 06:41:50 PM
If your needing a hand with shipping from Ireland to the UK I'm more than willing to assist seeing as you lot on the other side did it for me, Irishgroupage were ok but I have found a better crowd Translandgroup.com, they were half the price and much more professional, everything was over the internet and picked up and dropped off in 2 days, I can even put it on a pallet if its not already on one, let me know if you need assistance.

This is indeed good news - are you close to Clarecastle Co.clare? I believe the weigh and dimension's are 80cm x 45 cm x 50cm
75kg

Let me see if my contact here comes up with the goods first - will let you know.

Cheers.

Unfortunatley not its on the other side of the island, but if I can be of any assitance let me know

isle of man · « **Reply #40 on:** April 18, 2011, 08:18:04 PM »

Quote from: IrishCJ6 on April 17, 2011, 09:24:40 PM

Unfortunatley not its on the other side of the island, but if I can be of any assitance let me know

Irish - have it sorted but thank you for the offer it's very much appreciated

thorna · « **Reply #41 on:** April 22, 2011, 09:00:27 AM »

Quote from: V8 Bubba on April 16, 2011, 08:32:42 AM

wow i would be satisfied just to find a cheap 8274 without going mad over cables and uprating it

Yep thats what I got; picked up last night.
After a look over & bench test all seems ok; its missing the freespool handle.
I plan to clean it up give it a clean up per the guide on Pirate.

Will need a tray although its come with the one of the recovery truck which may form the basis!

isle of man · « **Reply #42 on:** April 25, 2011, 01:39:40 PM »

Thorna just seen this...

isle of man · « **Reply #43 on:** April 27, 2011, 11:56:05 AM »

It's arrived!!!

IrishCJ6 · « **Reply #44 on:** April 27, 2011, 05:47:27 PM »

Now thats a serious winch, what the hell are you doing to need that?

MOCAJ · « **Reply #45 on:** April 27, 2011, 05:50:52 PM »

Quote from: IrishCJ6 on April 27, 2011, 05:47:27 PM

Now thats a serious winch, what the hell are you doing to need that?

Warthog · « **Reply #46 on:** April 28, 2011, 08:56:52 PM »

Can we put some "Proper" winch challenge punches out for you to get at Cheapfest

Author Topic: Refurbing a Warn 8274 (Read 8454 times)

wrangler07

normalbloke

thorna