Topic: TJ teraflex belly up skid (Read 8917 times)

MOCAJ · « **on:** January 04, 2012, 09:35:49 PM »

anybody running one, i like the sound of it alot

input appreciated

Warthog · « **Reply #1 on:** January 04, 2012, 10:05:57 PM »

Claytons TJ, is running one.

You need the engine spacer blocks to level it all up though. As the viscous fan can hit the Radiator cowling under some driving conditions. Found this out after a few wheeling sessions.
By pushing the GB/Transfer case up. The angle of the engine changes and closes the clearance gap, between viscous and Radiator cowling.

One of the best Mods you can do imho.

That and removal of the saggy arse fuel tank

Cockney Boy · « **Reply #2 on:** January 04, 2012, 10:20:45 PM »

$500 tho Steve!!!

Warthog · « **Reply #3 on:** January 04, 2012, 10:25:34 PM »

MJS Could make them

$500 worth every cent.

bellysgonnagetchya · « **Reply #4 on:** January 05, 2012, 03:10:26 PM »

Ive just orderd the Rough Country one! £259.95 deliverd but you MUST have a 1.25" Minimum body lift and you also need a 1" motor mount lift! Dave at Llama said he has only imported 1 other apart from mine so you would be in a very small and exclusive group!

LOL

Just need to find how to lift the tank without buying a new tank guard from the states!

isle of man · « **Reply #5 on:** January 05, 2012, 05:32:17 PM »

Quote from: bellysgonnagetchya on January 05, 2012, 03:10:26 PM

Just need to find how to lift the tank without buying a new tank guard from the states!

Be carefull the tank guard is different on 2003->

wildwood · « **Reply #6 on:** January 05, 2012, 06:00:34 PM »

Having made mine and done the weldy weldy bit I can now say that it would be possible to do without welding................

4 mm sheet and square section for bracing cos it will bend without (how do I know???) and lots of 1/2 inch bolts of an 8.8 spec.

All you need is a socket set and a disc cutter to get the sheet to size..................... Cost about £50

MOCAJ · « **Reply #7 on:** January 05, 2012, 06:52:12 PM »

i already have a 1" body lift and 1" raised engine mounts so maybe i could make my own, mmmmm

and i already have the tank guard that raises it all up 1"

mmmmm

Bubba · « **Reply #8 on:** January 05, 2012, 06:53:10 PM »

i have a flat belly

MOCAJ · « **Reply #9 on:** January 05, 2012, 07:00:02 PM »

Quote from: V8 Bubba on January 05, 2012, 06:53:10 PM

i have a flat belly

i did notice how slim you looked at the last pub meet

i think i have found my summer project and its not taking you to weightwatchers kev

MOCAJ · « **Reply #10 on:** January 05, 2012, 07:06:53 PM »

Quote from: bellysgonnagetchya on January 05, 2012, 03:10:26 PM

Ive just orderd the Rough Country one

can i ask a big favour, when this arrives can you take photos and most importantly measure up this when it arrives, i can use it for cloning purposes

or i could come and have a look, where are you ?

Nosebolt · « **Reply #11 on:** January 05, 2012, 07:30:44 PM »

Quote from: V8 Bubba on January 05, 2012, 06:53:10 PM

i have a flat belly

looks like a sticky 'l' key there m8

bellysgonnagetchya · « **Reply #12 on:** January 05, 2012, 07:52:42 PM »

Quote from: my other cars a jeep on January 05, 2012, 07:06:53 PM

Quote from: bellysgonnagetchya on January 05, 2012, 03:10:26 PM
Ive just orderd the Rough Country one

can i ask a big favour, when this arrives can you take photos and most importantly measure up this when it arrives, i can use it for cloning purposes

or i could come and have a look, where are you ?

You are more than welcome to come have a looky, Im in Kent, about 2 miles from Brands Hatch.

Il certainly let you know when it arrives, I can take a pic or 3 and will take as many measurements as you need if you are too far away to come visit!

Dave @ Llama said Rough Country will be shipping his pallets out over the weekend with any luck so I should have it withing the next 10-14 days! A Woo Hoo!!

MOCAJ · « **Reply #13 on:** January 05, 2012, 07:56:46 PM »

kents a long way from me dood, i am in Redditch, just south of Birmingham so yep, pics and lots of measurements please

thanks for any help

Dodster · « **Reply #14 on:** January 05, 2012, 08:00:43 PM »

Ive got the teraflex steve if you need to compare it with anything, great mod as Wartog says but I reckon if youve got the gear and the skills you could make one with even more clearance..

Warthog · « **Reply #15 on:** January 05, 2012, 08:07:09 PM »

I memory serves me Correct? If you go totally flat, there isnt any room for the standard cat.

The gearbox linkages also become an issue too.

But nothing that cant be worked out.

On a safety note! The plate support the driveline. So dont just undo the bolts that hold the original on, with out supporting

MOCAJ · « **Reply #16 on:** January 05, 2012, 08:09:29 PM »

will have to have a lie under your truck next time we meet (@ ribbo- j33p i hope)

i have access to steel, laser cutting, can get welding done and powder coating

MOCAJ · « **Reply #17 on:** January 05, 2012, 08:11:33 PM »

cat and linkage problems noted mark

Warthog · « **Reply #18 on:** January 05, 2012, 08:15:12 PM »

Quote from: my other cars a jeep on January 05, 2012, 08:11:33 PM

cat and linkage problems noted mark

Just added a safety note to my last post. Very important one

MOCAJ · « **Reply #19 on:** January 05, 2012, 08:20:11 PM »

i always stick the trolley jack under mate

i do try to clean out the skid after each off road adventure

wildwood · « **Reply #20 on:** January 05, 2012, 10:20:39 PM »

In brief but ask me more if ya want.....

Support transfer case with axle stand.
Remove skid plate and draw round and mark the 6 holes and the trans mount holes. Job half done
cut to fit and also go for 6mm that's what I used.(went and had a measure

)
I ran exhaust down left side (but had room) as no cat needed(age).
1" body lift and 1" engine lift is all I have. Should save you 3" or like going up 6" in tyre size

Dtimot8 · « **Reply #21 on:** January 06, 2012, 06:19:10 PM »

Hi
I'm in Maidstone
would like to see this - when it arrives
quite willing to lend a hand
desk jockey as a job so useless at spanners but good at tea making and know the difference between mm and inch sockets
Tim

Bulldog67 · « **Reply #22 on:** January 06, 2012, 06:22:05 PM »

whereabouts in Maidstone dood? I too reside in that very warm part of the country

Dutch · « **Reply #23 on:** January 06, 2012, 08:01:05 PM »

Quote from: Dtimot8 on January 06, 2012, 06:19:10 PM

I'm in Maidstone
useless at spanners but good at tea making

Hmmm... anybody notice there's a trend developing here

Bulldog67 · « **Reply #24 on:** January 06, 2012, 08:04:35 PM »

its evolution dood, we have gone from nosebolt & greggmo to monkeys with sticks to birtys to homo sapiens to those that have the intellectual prowess to reside in the south of the country

Author Topic: TJ teraflex belly up skid (Read 8917 times)

Cockney Boy

bellysgonnagetchya

Nosebolt

bellysgonnagetchya

Dodster

Dtimot8