Project SYE the plan is to swap these 2
By using the rear slip yoke and the front yoke and Add some brain juice
And someone with a lathe
And there you have it! although this is a mock up, need to weld them together.
didn't fancy the old hack'n'tap so i'm trying the groove'n'circlip concept
so I took off both props marked up the groove started the jeep put it in reverse and begun cutting with the grinder
test fitted the unwelded yoke and circlip
the welded up the yoke second time using the TIG
sadly I can't use the orginal cone so need to make a new rear seal holder which is to come .
to this
The circlip is off of an old TC so far nothing brought