Topic: Help please on aw4 tech info (Read 4882 times)

big_patrol · « **on:** March 19, 2014, 07:47:15 PM »

Right people I'm having an adapter built for behind my aw4, the only issue the engineer is having is identifying the output shaft. We know it's 23 spline and we know it's OD. The guy has asked for anymore I can find out. I believe he is unsure weather it's straight cut or not.

Do any of you guys have any specs etc

Time is ticking away for getting the car ready so, many thanks in advance

Danny

isle of man · « **Reply #1 on:** March 19, 2014, 08:12:40 PM »

Willo is your man on this, he has recently completed a AW4 on his Wrangler.

big_patrol · « **Reply #2 on:** March 19, 2014, 08:23:45 PM »

Sadly not he is in the same boat as me

dtooth · « **Reply #3 on:** March 19, 2014, 08:45:57 PM »

http://www.makcotransmissionparts.com/A340.html

This anygood

big_patrol · « **Reply #4 on:** March 19, 2014, 08:54:43 PM »

Lots of info there cheers but still no dimensions

isle of man · « **Reply #5 on:** March 19, 2014, 09:01:15 PM »

Right......OK, are these any good CLICKY ?

isle of man · « **Reply #6 on:** March 19, 2014, 09:02:53 PM »

....OR THESE ?

isle of man · « **Reply #7 on:** March 19, 2014, 09:09:39 PM »

Also THIS

Just bouncing ideas at the moment, hope you find some of this useful ?

big_patrol · « **Reply #8 on:** March 19, 2014, 09:10:40 PM »

Nothing yet but any thing could lead me there. Thanks for trying

isle of man · « **Reply #9 on:** March 19, 2014, 09:16:16 PM »

OK, OK what about these PEOPLE ?

big_patrol · « **Reply #10 on:** March 19, 2014, 09:21:34 PM »

I'm sending Emails hoping to get something back.

big_patrol · « **Reply #11 on:** March 19, 2014, 09:23:38 PM »

Thanks Peter

isle of man · « **Reply #12 on:** March 19, 2014, 09:29:11 PM »

Just trying to help, I know how frustrating it can be.

big_patrol · « **Reply #13 on:** March 19, 2014, 09:36:29 PM »

The problem seems to be that the walls of the spline are hard to identify, by that I mean weather they are square or not

isle of man · « **Reply #14 on:** March 19, 2014, 09:54:03 PM »

All the splines I recall have been square top, but I'm 90% on this.

Been almost 5 years since I have built anything for off road use, so my memory could be fuzzy!!

big_patrol · « **Reply #15 on:** March 19, 2014, 09:57:10 PM »

I am of the same opinion but they aren't certain

Dave The Sparky · « **Reply #16 on:** March 19, 2014, 10:36:41 PM »

Who is cutting the splines for you Danny?

And also Congrats by the way!!!!!

big_patrol · « **Reply #17 on:** March 19, 2014, 10:48:17 PM »

Neal jones at red winch is making the adapter for me, he is just struggling to identify the spline spec.

Thanks Dave

Dave The Sparky · « **Reply #18 on:** March 19, 2014, 11:07:02 PM »

Probably one that can be mass produced using a one off tool made just for that one job.

j33pky · « **Reply #19 on:** March 20, 2014, 06:01:36 PM »

What a big help you are Dave!!

Dave The Sparky · « **Reply #20 on:** March 20, 2014, 10:31:38 PM »

Quote from: j33pky on March 20, 2014, 06:01:36 PM

What a big help you are Dave!!

Not my fault that he has taken it elsewhere in the country when there are local engineers who would have the know how and possibly even the tooling

Anyway why dont you just make him one out of wood?

j33pky · « **Reply #21 on:** March 20, 2014, 11:36:21 PM »

Wanker... Wood is a inappropriate material for making output shafts for aw4's.it Only used for making Isuzu stereos and Windows! And the odd fence. But I could fashion one out of silly putty if that could help.. Do we need wally the spray painting walrus to make a appearance and teach you the differences between wood and metal/silly putty?

j33pky · « **Reply #22 on:** March 20, 2014, 11:37:32 PM »

Sorry didn't mean to put a pic off bulldawg cuddling a fat bird.

xr6jeeper · « **Reply #23 on:** March 20, 2014, 11:53:17 PM »

Quote from: j33pky on March 20, 2014, 11:37:32 PM

Sorry didn't mean to put a pic off bulldawg cuddling a fat bird.

j33pky · « **Reply #24 on:** March 21, 2014, 05:13:58 PM »

The all knowing wally will put you straight sparky

Author Topic: Help please on aw4 tech info (Read 4882 times)

big_patrol

big_patrol

dtooth

big_patrol

big_patrol

big_patrol

big_patrol

big_patrol

big_patrol

big_patrol

j33pky

j33pky

j33pky

xr6jeeper

j33pky