Topic: WJ 4.0l 1999 Grand Cherry (Read 7702 times)

jtp · « **on:** September 21, 2006, 09:48:39 PM »

Fantastic car but giving problems.
Most time it starts and travels, engine cuts out momenterily after about 400m, blip the throttle and vehicle runs fine.
Also very lumpy on tickover, to such an extent vehicle can rock.
Problem seems to be getting worse as I am now experiencing what seems like a missfire when engine is coasting when travelling at speed.
Have changed 02 sensors, main dealer reccomends changing PCM. expensive!
Any help appreciated.

daggie · « **Reply #1 on:** September 21, 2006, 09:54:53 PM »

go to a diffrent dealer, could be a number of things, cps for example, fault codes are needed :wink:

Anonymous · « **Reply #2 on:** September 21, 2006, 10:00:31 PM »

What mileage is it?

Oh and where are you based?

greggmo · « **Reply #3 on:** September 21, 2006, 11:06:18 PM »

throttle position sensor or try oxygen upstream sensor would my first Port's of call.

jtp · « **Reply #4 on:** September 25, 2006, 06:12:00 PM »

Based West Yorks. Milage is 72k
Can you retrieve error codes on this model without computer ?

Tank · « **Reply #5 on:** September 25, 2006, 06:14:42 PM »

Take a look here

http://www.wjjeeps.com/faultcodes.htm

Should be of help!!

jtp · « **Reply #6 on:** September 25, 2006, 06:41:25 PM »

Tried using the ignition key as described by this artical with no joy.

Author Topic: WJ 4.0l 1999 Grand Cherry (Read 7702 times)

jtp

WJ 4.0l 1999 Grand Cherry

daggie

(No subject)

Anonymous

(No subject)

greggmo

(No subject)

jtp

(No subject)

Tank

(No subject)

jtp

(No subject)